Intercom - Auerswald TFS-Dialog 400 Advanced Information

Functions, applications, concepts

Intercom

Intercom
The device can be called from any internal telephone using its internal
destination number. The call is signalled to the device by means of a
recurring signal sound. An additional bell can also be installed and switched
on.
Options for call acceptance from the device:
• Immediate (0 seconds): The voice connection is established
automatically and immediately.
• Automatic according to timing (5 to 85 seconds): The voice connection
is established by pressing any door bell button within the set time
period. Once the set time period has elapsed, the call connection is
established automatically.
• Manual (90 seconds): The voice connection is established by pressing
any door bell button within the set time period. The call is ended if no
door bell buttons are pressed within the set maximal call duration.
Note: The device accepts the call immediately as long as it is in
configuration mode (4 minutes). Only once this period of time has
elapsed can the call be handled as defined in the settings.
Configuration procedure:
• Switch on the additional bell.
– Via the TFS Set app (in menu Extended > Door call (intercom))
– Via an internal telephone
(page 48))
• Switch the loudspeaker on/off.
24
(Extended > Door call (intercom)
TFS-Dialog 400 - Advanced Information V01 10/2017