Reset Button - Siemens SCALANCE XR-300WG Series Operating Instructions Manual

Pluggable transceiver slots
There is an LED for each plug-in transceiver slot.
LED color
Green
Yellow
-
3.4

RESET button

EXPLOSION HAZARD
Do not press the RESET button if there is a potentially explosive atmosphere.
Position
The "RESET" button is located on the front of the SCALANCE XR-300WG.
Figure 3-1
Resetting the device to factory defaults
NOTICE
Previous settings
If you reset, all the settings you have made will be overwritten by factory defaults.
NOTICE
Inadvertent reset
An inadvertent reset can cause disturbances and failures in the configured network.
SCALANCE XR-300WG
Operating Instructions, 05/2017, C79000-G8976-C454-01
LED status
Lit
Flashing
Off
WARNING
Position of the "RESET" button on the SCALANCE XR-300WG
Meaning
Link exists
Data transfer at the port
No link exists
Description of the device
3.4 RESET button
23