Siemens SCALANCE XR-300WG Series Operating Instructions Manual page 66

Approvals
FDA and IEC marks
The following devices meet the FDA and IEC requirements listed below:
Device
SCALANCE XR324WG
SCALANCE XR328-4C WG
Figure A-1
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual
● "Industrial Ethernet / PROFINET - Passive network components" System Manual
You will find information on the system manuals in the section "AUTOHOTSPOT", in
"Further documentation".
● "EMC Installation Guidelines" configuration manual
60612658 (http://support.automation.siemens.com/WW/view/en/60612658)
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
66
FDA and IEC approvals
CAUTION
WARNING
Fulfills FDA and IEC requirements
-
With modular devices, the marking is on the
pluggable transceivers.
Operating Instructions, 05/2017, C79000-G8976-C454-01
SCALANCE XR-300WG