Table of Contents
Advertisement
30/103
Bosch Rexroth AG
Transport and storage
5.3
Product storage
5.4
Storage times
Cables and connectors
Store the motor components in their original package at a dry, dust free, vi‐
bration free and light protected place without direct solar radiation. Observe
the specified classes 1K3, 1B1, 1C2, 1S1, 1M1 of DIN EN 60721-3-2 for stor‐
age.
NOTICE
Use coverings to protect the products from moisture.
Store them only in rainproof and dry rooms.
On delivery, protective sleeves and covers may be attached to our motors.
They must remain on the motor for transport and storage. Do not remove
these parts until shortly before assembly.
Independed from the storage time of the motor components (observe the
warranty claim), the function is preserved under observance and execution of
additional measures at start-up.
Storage time
Measures before commissioning
< 1 year
None
1 ... 5 years
Check the electric contacts to verify that they are free from corrosion
Check the electric contacts to verify that they are free from corrosion
> 5 years
Visually inspect the cable jacket. Do not use the cable if you detect any
abnormalities (squeezed or kinked spots, color deviations, ...).
Tab. 5-1:
Measures before commissioning of cables and connectors that have
been stored over longer periods of time
DOK-MOTOR*-ML3********-IT01-EN-P
ML3 Self-Cooled Linear Motors
Damage due to moisture and humidity!
Advertisement
Table of Contents
