Table of Contents
Advertisement
DOK-MOTOR*-ML3********-IT01-EN-P
ML3 Self-Cooled Linear Motors
1
About this documentation
1.1
Validity of this documentation
1.2
Editions of this documentation
Edition
Date
Remark
01
2018-06
First edition
1.3
Additional documentation
Title
ML3
Self-cooled linear motors
Rexroth Connection Cable
IndraDrive and IndraDyn
Electromagnetic Compatibility (EMC) in Drive and
Control Systems
Documentation about special products are available on demand.
1.4
Presentation of information
Safety instructions
This instruction must be observed by assemblers, operator, service engi‐
neers and facility operators. It contains notes about handling the motor com‐
ponents primary and secondary part of a ML3 kit motor.
Before you operate motors, read this operating instruction to ensure a safe
and frictionless functionality and a long motor lifetime.
Tab. 1-1:
Record of revisions
This operating instruction is only valid with the following Rexroth documenta‐
tion:
Document type
Project
planning
manual
Selection data
Project planning
Tab. 1-2:
Additional documentation
The safety notes in this documentation describe signal words (danger, warn‐
ing, caution, note) and a signal symbol (acc. to ANSI Z535.6-2011).
The signal word is intended to draw your attention to the safety instructions
and describes the seriousness of the danger. The warning triangle with excla‐
mation mark indicates the danger for persons.
DANGER
Non-compliance with this safety instructions will result in death or severe per‐
sonal injury.
Bosch Rexroth AG
About this documentation
Document number
DOK-MOTOR*-ML3x*******-PR□□-□□-P
DOK-CONNEC-CABLE*INDRV-AU□□-□□-P
DOK-GENERL-EMV********-PR□□-□□-P
15/103
Advertisement
Table of Contents
