Bosch Rexroth ML3 Operating Instructions Manual page 83

Self-cooled linear motors
Hide thumbs Also See for Rexroth ML3:
Table of Contents

Advertisement

DOK-MOTOR*-ML3********-IT01-EN-P
ML3 Self-Cooled Linear Motors
Parallelism and symmetry of machine parts
Before primary and secondary part can be mounted, align the parts of the
machine. Especially the machine slide is to be brought into a defined position
to the machine bed. When aligning, the installation dimensions and toleran‐
ces regarding parallelism and symmetry according to must be kept.
To keep the tolerances, it is necessary that the fastening holes and threads
for the primary part and the secondary part in the machine are strictly done
according to the dimensions of the particular dimension sheet. The alignment
of the motor components must be done according to
and symmetry between primary and secondary parts" on page
You will find further notes regarding assembly of primary and secondary parts
in the chapter "Assembly".
Fig. 12-26:
Parallelism and symmetry between primary and secondary parts
Bosch Rexroth AG
81/103
Appendix
fig. 12-26 "Parallelism
81.

Advertisement

Table of Contents
loading

Table of Contents