Table of Contents
Advertisement
34/103
Bosch Rexroth AG
Assembly
Size primary part
ML3P03
M4 (DIN EN ISO 4762)
ML3P06
M5 (DIN EN ISO 4762)
ML3P11
M5 (DIN EN ISO 4762)
Dowels
Screw size
Screw-in depths
min. 4 mm
max. 5 mm
min. 4.5 mm
max. 6 mm
Tab. 6-2:
Fastening screws with tightening torques for ML3P primary parts
Size primary part
ML3P03 ... 11
Tab. 6-3:
Dowels for ML3P primary part
①
Mounting threads
②
Dowel holes (blind holes)
1 / 2 / 3 ...
Tightening row
③
Dowels
Fig. 6-3:
Tightening row fastening screws of primary part
The screw-on surfaces must be cleaned and be free of grease before the pri‐
mary parts can be screwed on the machine construction.
Mounting instructions:
1. Insert the dowels into the dowel holes in ML3P and position the primary
part on the guidance.
DOK-MOTOR*-ML3********-IT01-EN-P
ML3 Self-Cooled Linear Motors
Tightening torque
Strength class
(± 10 %)
2 ... 3 Nm
3 ... 5 Nm
8.8
3 ... 5 Nm
Dowels (rustless)
5h8
(with inner thread M2 for disassembly)
Advertisement
Table of Contents
