Table of Contents
Advertisement
CONTROLS – CONNECTIONS, IGNITER, FLAME SENSOR, SIGHT GLASS,
POWERED ANODES
The connections for the hot surface igniter and the flame sense rod are shown below. Also shown is the
burner sight glass. These features are typical for all models.
Flame
Sensor
Hot Surface
Igniter
Mounting Bolts
Burner sight glass
The new Ultra Force commercial water heater is equipped with powered anodes. These anodes never
need replacement. The CCB monitors the current through the anodes and will declare a fault if there is a
disconnected wire or if there is no water in the tank.
Powered anode connection
40
Servicing should only be performed by a Qualified Service Agent
Advertisement
Table of Contents
