Table of Contents
Advertisement
TOOLS REQUIRED
•
ELECTRICAL MULTIMETER CAPABLE OF MEASURING CONTINUITY/ OHMS, AC & DC VOLTS,
AMPERES, MICROAMPERES, MILLIVOLTS, and FREQUENCY (Hz)
•
UEi Model DL289 or equivalent
•
DIGITAL MANOMETER + 60" W. C. in .01" increments
Note: A digital manometer is required for testing pressure switches and can replace a gas pressure
gauge, draft gauge or slack tube manometer for checking gas pressure.
•
UEi model EM200 or equivalent
•
WATER PRESSURE GAUGE w/LAZY HAND AND HOSE BIBB CONNECTION
•
THERMOMETER
•
1-1/16 INCH SOCKET WITH EXTENSION FOR ANODE REPLACEMENT
•
SET OF NUMBERED DRILL BITS
DIGITAL MANOMETER
DIGITAL MULTIMETER
Servicing should only be performed by a Qualified Service Agent
WATER PRESSURE
TEST GAUGE W/LAZY
HAND AND HOSE BIBB
CONNECTION
3
Advertisement
Table of Contents
