Operations - Den-Sin C-150D User Manual & Spare Parts Manual

1. Getting acquainted with your High Pressure Cleaner

Operations

To prevent accidents from happening, ensure the safety of the person(s) who
uses the equipment and to protect bystanders and nearby placed inventory or
machinery, a few safety precautions needs attention.
WARNING
1) Treat the machine as a high-speed cutting tool.
2) Anyone under the age of 18 is NOT allowed to use the machine.
3) Always keep the High Pressure Cleaner and its accessories in good working condition.
Check the machine for defects. Do NOT start up the machine if there is any defect. Have
the machine serviced.
4) When using the High Pressure Cleaner and its accessories, eye protection must be worn to
protect against repelling or ricocheting matters causing eye damage.
5) Suitable clothing and footwear must be worn while using the equipment to protect the
operator. Do not try to clean clothes or footwear with the machine.
6) Precautions must be made to keep bystanders away from the working range.
7) Do NOT spray-clean on yourself, others or live animals. The
high-pressure beams are capable of making severe injuries.
8) Do NOT spray at electrical equipment OR the machine itself.
9) While repairing or servicing the equipment and its accessories always make sure the
machine is turned off and disconnected from the main power supply.
10) Only allow instructed personnel to operate the machine.
11) Activating the trigger/gun can cause backward force therefore always hold spray lance
with both hands.
12) When pausing during operation turned off the main switch of the machine and ensures
that the trigger/gun is locked.
13) Only use high-pressure hoses, connections and nozzles specified by DEN-SIN.
14) IMPORTANT – Do not use the machine in a possible explosive environment in
accordance with EN-50014.
C-150-200D V16 Page 5