Table of Contents
Advertisement
1.2 Explanation of the pictograms and other
information
Warning signs
en
General
warning
Obligation signs
Wear
Wear eye
protective
protection.
clothing
Symbols
Read the
Return waste
operating
material for
instructions
recycling.
before use.
2. Description
2.1 Use of the product as directed
The tool is designed to be used for dispensing the
contents of Hilti HTE 50 two-component cartridges
with a volume of 33 fl.oz.
The appliance is designed for professional use and
may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be
informed of any special hazards that may be encoun-
tered. The appliance and its ancillary equipment may
3. Technical data
Right of technical changes reserved.
Tool without cartridge
Weight (without mortar)
Dimensions (L x W x H)
Input pressure
Air consumption
2
Printed: 07.07.2013 | Doc-Nr: PUB / 5070005 / 000 / 00
Wear
protective
gloves.
National waste
material
recycling
system
Location of identification data on the tool
The type designation and serial number can be found
on the type identification plate on the appliance. Make
a note of this data in your operating instructions and
always refer to it when making an enquiry to your
Hilti representative or service department.
Type:
Generation: 01
Serial no.:
present hazards when used incorrectly by untrained
personnel or when used not as directed.
Modification of the appliance or tampering with its
parts is not permissible.
To avoid the risk of injury, use only genuine Hilti tools
and accessories.
Observe the information printed in the operating in-
structions concerning operation, care and mainte-
nance.
3.9 kg (138 oz)
600 mm (23.62") x 120 mm (4.72") x 300 mm
(23.6 x 4.7 x 11.8 ")
max. 8 bar (116 PSI)
max. 40 l/min. (10.57 gal./min.)
Advertisement
Table of Contents
