Advertisement
PRODUCT CARE
Product Care
This DVR Display has been designed to provide optimum performance and service without
any required scheduled maintenance other than occasional cleaning.
Disconnect Display from power source before cleaning Display, optional
Touch Screen or Display's enclosure.
• Do not use abrasive or solvent-based (flammable) cleaners on Display
• Do not use paper products as they may scratch Display screen, and
• Do not directly apply cleaning solutions to Display screen.
Display Screen Cleaning
• A vinegar-based cleaner is preferred: prevents streaking, degradation of coatings
• A nonabrasive glass cleaner may be used, as in professional foam glass cleaner
• Apply cleaning solution to a soft clean cloth, dampening slightly
• Keep a fresh side of cleaning cloth towards screen surface to avoid scratching it with
accumulated grit as Display screen is made of glass, and
• To minimize risk of abrasion to glass screen, air drying is recommended.
Display Enclosure
• Clean Display enclosure with soft clean cloth lightly dampened with a mild detergent solu-
tion
• Wipe down with clean water; dry with a soft clean cloth.
In marine or similar environments, a benefit of a vinegar-based cleaner
is its effectiveness in dissolving mineral and salt deposits.
Long-term Storage
• For long-term storage, it is suggested Display be stored in a normal indoor environment
and Display glass be protected from accidental damage
• For pedestal mount units, disconnect cable(s) and loosen arm adjustment to a point where
ball can be removed from arm, or
• For Flush or Panel Mount units, cover product with a protective covering that will not
scratch or transfer any dyes to Display screen.
Disassembling Display voids warranty. To avoid risk of electrical shock,
do not disassemble enclosure; Users cannot service. User maintenance
is restricted to cleaning or power cable replacement, as explained.
8
MPC-ML2DVR-UM(B) 3/2019
enclosure or any other electrical device (cables, power cable, etc.)
Advertisement
