Product Care And Maintenance - Marine PC MPC-AWMVRL User Manual

PRODUCT CARE AND MAINTENANCE

Product Care
This MPC-AWMVRL Monitor has been designed to provide optimum performance and service
without any required scheduled maintenance other than occasional cleaning.
Turn off the Monitor power before cleaning the Monitor, optional Touch Screen
or unit's enclosure.
WARNING!
• Do not use abrasive cleaners or solvent-based (flammable) cleaners on the
Flat Panel or Touch Screen Display, its enclosure or any other electrical de-
vice (cables, power cord, etc)
CAUTION!
• Do not use paper products as they may scratch the Display screen, and
• Do not directly apply cleaning solutions to the Display screen.
Display Screen Cleaning
• A vinegar-based cleaner is preferred to prevent streaking and degradation of the
coatings, or
• A non-abrasive glass cleaner such as a professional foam glass cleaner
• Apply the cleaning solution to a soft clean cloth, dampening slightly
• Keep a fresh side of the cleaning cloth towards the screen surface to avoid
scratching it with accumulated grit, and
• To minimize the risk of abrasion to the screen, air drying is recommended.
In marine or similar environments,
an added benefit of a vinegar-based
cleaner is its effectiveness in
dissolving salt deposits.
Optional Touch Screen
Disconnect cabling from the Touch Screen Display before cleaning. A Touch Screen
Display will be activated by cleaning the Display. This may create a potentially
dangerous condition.
WARNING!
Optional Touch Screen Cleaning
• Follow cleaning directions above, or use a special screen cleaning tissue or a solution specifi-
cally formulated for antistatic coatings.
• Lightly dampen a soft clean cloth with water, vinegar based cleaner or a general purpose mild
detergent solution
• Keep a fresh side of the cleaning cloth towards the screen surface to avoid
scratching it with accumulated grit, and
• To minimize the risk of abrasion to the screen, air drying is recommended.
Monitor Enclosure
• Clean the unit enclosure with a soft clean cloth lightly dampened with a
general purpose mild detergent solution
• To rinse, wipe down with clean water, and
• Dry with a soft clean cloth.
8
MPC-AWMVRL-UM(B) 1/2011