Advertisement
LCD AND ELECTRICAL SAFETY
LCD Display Safety
It is recommended Users adhere to personal safety in the instance the DVR display screen
should be shattered. Aside from obvious glass shards, the fluids in the LCD are a known skin
irritant.
FLUIDS FROM LCD DISPLAY
• If Display should become shattered, do not touch fluids from LCD Screen
• If fluid should get on hands or clothing, immediately wipe off with liquid soap
or rubbing alcohol on a clean towel; wash with water; immediately consult with
a doctor, and
• If fluid gets in the eyes, flush eyes immediately with water for a minimum of
15 minutes; immediately consult with a doctor.
Electrical
EMI/RFI
Product has been engineered to meet or exceed international industry standards
addressing product design and enclosure protection against EMI/RFI.
Connecting Cables
• Disconnect power to system when Display is being installed
• Upon installation, verify power input connector is securely seated on Display
• Position power cable so it is not in contact with hot surfaces
• Do not allow anything to rest on power cable, and
• Protect power cable from extreme heat sources.
Power Source
• Always connect to a properly grounded DC (standard) power source
• Unit may be powered with a qualified AC/DC Adapter (ask factory for details)
• Any equipment to which Display is attached must also be connected to prop-
erly wired and grounded power sources
• Operational voltage is 10 - 36 VDC (Input is 12, 24, 28 VDC nominal), and
• Power Consumption is: 30 Watts maximum.
POWER CONSUMPTION
MPC-ML2DVR power consumption is listed at 30 Watts maximum.
MPC-ML2DVR-UM(B) 3/2019
7
Advertisement
