Related Manuals for Marine PC MPC-AWM3V
Summary of Contents for Marine PC MPC-AWM3V
- Page 1 MARINE PC MARINE PC MPC-AWM3V All-Weather LCD Displays User Manual www.MarinePC.com...
- Page 2 Owner Record Here is an easy-to-locate form to record the unit’s serial number, and from the invoice, record the invoice date. The unit’s serial number is located on the back panel. If the unit ever requires service, please refer to this information when contacting the MarinePC Service Center.
- Page 3 MPC-AWM3V All-Weather LCD Displays User Manual www.MarinePC.com MPC-AWM3V-UM(A) 10/2011...
-
Page 4: Table Of Contents
Introduction ..........................Safety .............................. Product Care and Maintenance .................... System Set-up..........................Installation ..........................Cable Connections........................Operator Controls ........................On-Screen Display (OSD) ...................... Appendix A - Mechanical Drawings ................. Appendix B - Troubleshooting ................... Appendix C -Technical/Environmental Specifications..........UM-MPC-AWM3V(A) 10/2011... -
Page 5: Introduction
All of our Professional Series monitors offer extended operational temperature range and wide tolerance DC power input. Our Marine PC Technical Support Team is prepared to assist you, just contact us at: support@marinepc.com. UM-MPC-AWM3V(A) 10/2011... -
Page 6: Safety
This icon is intended to tell you of important operating and/or caution! maintenance instructions. General Unit Safety • Always disconnect the unit from the power source before cleaning • Do not operate the unit with a damaged cord • Do not operate if the unit has been dropped or damaged. The unit needs inspection by qualified Marine PC Service Personnel • Position the power cord so it will not be in contact with hot surfaces • Do not allow anything to rest on the power cord, and • Do not place the power cord where there will be foot traffic. General Safety Precautions warning! • Power cord must be connected to a properly wired and grounded power source • Any equipment to which the unit will be attached must also be connected to properly wired and... -
Page 7: Connecting Cables
• Exhibits a distinct change in performance, indicating a need for service. Shipping If the unit should need to be shipped to the Marine PC Service Center, the original packing material should be used to insure safety of the unit in shipping. Repack the unit as it would have originally been received from Marine PC. -
Page 8: Product Care And Maintenance
PRODUCT CARE AND MAINTENANCE Product Care This MPC-AWM3V Monitor has been designed to provide optimum performance and service without any required scheduled maintenance other than occasional cleaning. Disconnect the Monitor from the power source before cleaning the Monitor, optional Touch Screen or unit’s enclosure. -
Page 9: System Set-Up
SYSTEM SET-UP System Requirements The MPC-AWM3V accepts a standard NTSC or PAL composite video signal from any video source such as a camera, VCR or DVD. Shipping Box Contents The MPC-AWM3V is shipped in a custom box with custom foam packaging. We recommend you save the box and all packaging materials in case the unit would need to be returned to the Marine PC Service Center. -
Page 10: Installation
INSTALLATION The MPC-AWM3V is designed to be mounted with a universal ball-and-socket mounting kit, in a Flat Panel position or optional Flush Mount configuration. Pedestal Mount The MPC-AWM3V is shipped with a RAM® universal ball-and-socket system mounting kit (Figure 2). By installing the Monitor with this kit, the User can quickly adjust the viewing angle to improve viewability in changing environments. -
Page 11: Panel Mount
The installer will need to supply screws for this type of installation. The mount diagram of the Flush Mount Bezel is on the User CD and on Marine PC’s web site, (www.marinepc/support). When the placement site has been decided, it is recommended the installer use these measurements when cutting the opening for the Monitor’s installation. -
Page 12: Cable Connections
Connectors are physically unique to insure the installer makes the proper connections. Composite BNC Connector The MPC-AWM3V accepts a standard NTSC or PAL composite video signal from any video source such as a camera, VCR or DVD. This signal is carried to the Monitor via a coaxial video terminated with a BNC connector. -
Page 13: Dc Power Connector
Optional AC Power Connector • The optional AC Power Adapter Cable Set consists of a 3 m (10 ft) cable, the power adapter and a 1.8 m (6 ft) cable • The cable accepts voltage from 110 to 250 VAC and frequency from 47 to 63Hz • The AC power plug is standard for 120 VAC/60Hz, common in North America, and • Follow procedure above to for connection to the unit. When connecting or discon- necting, never pull on the ca- ble, only hold the connector.. caution! UM-MPC-AWM3V(A) 10/2011... -
Page 14: Operator Controls
The Source Select Button is used to select an Input Source when more than one Input is available. Pushing this button will advance from the first connected source to the next and then return to the first source in a circular fashion. UM-MPC-AWM3V(A) 10/2011... -
Page 15: On-Screen Display (Osd)
• If SELECT is not pressed, or inactivity is detected within the 15 second factory default OSD menu duration, any screen function adjustments made will be saved. It is recommended to adjust the LED back light brightness to maximum before fine-tuning the OSD Source Screen Controls Menu Parameter: Brightness. UM-MPC-AWM3V(A) 10/2011... - Page 16 • Ranges on the Display bar are: low – pinks; mid-range – greens and upper – blues. Video Color Video Color adds or subtracts color values from the picture. • Press the LEFT Arrow button to remove color and go to black and white, and • Press the RIGHT Arrow button to add color. Recall The Recall feature resets the Controls Menu items to factory default. • Select “Recall“ control to reset all the controls to factory default, and • Press the Select button to save changes. Exit • Press the RIGHT or LEFT Arrow button to get to Exit, and • Press Select to Exit. UM-MPC-AWM3V(A) 10/2011...
-
Page 17: Appendix A - Mechanical Drawings
APPENDIX A Mechanical Drawings Mount diagrams of the MPC-AWM3V and its dimensions may assist you in installation of the Monitor. You may find them on our website at: http://www.marinepc.com Look in the Support Tab for Drawings Mount diagrams of the optional Flush Mount Bezel and its dimensions may assist you in installa- tion of the Monitor. - Page 18 Monitor has incorrect or bad sync signals. Check for proper video cable installation, or replace suspected faulty cable. Symptom: Display image is not properly sized Possible Problem Solution OSD adjustments need to be made Adjust the Video Vertical and Horizontal controls through the OSD. UM-MPC-AWM3V(A) 10/2011...
-
Page 19: Appendix C -Technical/Environmental Specifications
ü Vibration 5.8 G (5-500 Hz) ü ü ü IP Rating IP67 (NEMA 6P Submersible) ü ü ü Humidity 0-100% ü ü ü Designed to meet FCC B, CE ü ü ü Altitude 45,000 ft. ü ü ü UM-MPC-AWM3V(A) 10/2011... -
Page 20: Warranty Terms And Conditions
CONSEQUENTIAL OR INCIDENTAL DAMAGE reserves the right to partial ship any order. OR FOR SPECIFIC PERFORMANCE OF THE PRODUCTS, THEIR MERCHANTABILITY OR Cancellations: Once an order is placed by FITNESS FOR ANY PARTICULAR PURPOSE. the purchaser and accepted by MarinePC, UM-MPC-AWM3V(A) 10/2011...