Marine PC MPC-ML2DVR User Manual page 38

EVENTS PERFORMED AT BUILT-IN-TEST (BIT)
BIT SYSTEM TEST.
command, initiated by the user from the I-BIT menu, or System Test may run continuously.
Table 8 shows when each test is run, in various BITs: Power-up (P-BIT); Initiated Serial and
Iniatiated Menu (I-BIT), and Continuous (C-BIT).
Events Performed at P-BIT, I-BIT and C-BIT
SYSTEM TEST NAME
RAM ERROR
ROM ERROR
EEP ERROR
DVR ERROR
KEY ERROR
PWR ERROR
38
MPC-ML2DVR-UM(B) 3/2019
The System Test may be run at Power ON, when initiated by a BIT serial
POWER UP
YES
YES
YES
YES
YES
YES
This section is intentionally left blank.
INITIATED
SERIAL
YES
YES
YES
NO
YES
YES
Table 8. BIT EVENTS
INITIATED CONTINUOUS
MENU
YES NO
YES NO
YES NO
NO YES
YES NO
YES NO