Advertisement
UTILITY MENU
FACTORY RESET
FACTORY RESET
L1
PROGRAM BTN
L2
BTN TEXT [TIME OUT 5s]
L3
STARTUP
L4
J7 VCom
L5
Utility Menu
Many options are set in the Utility Menu (Figure 28), accessed through the Main Menu.
FACTORY RESET (L1).
THEIR DEFAULT STATE. PERFORM FACTORY RESET? User selects YES (R4) (Confirm) or NO (R5) (Can-
cel). During Factory Reset, screen message reads PERFORMING FACTORY RESET. Display resets
defaults are:
(30 seconds);
• VIDEO LAYOUT: Resets to Single Channel (no PIP/POP/QUAD)
• VIDEO SOURCES: All ENABLED; Composites (4)
• SERIAL COMMUNICATIONS PORTS: Sets to default RS232
• CONTRAST: Resets to a predetermined factory setting
• KEY DOWN/KEY UP: Restores to Text List (See Section Communication Protocol)
• BUTTON TEXT: restores to ON, and
• NVIS COLOR (If Option installed): Sets to GREEN.
PROGRAM BTN (L2).
BTN TEXT (L3).
Adjust Button Label Text as to: Always ON, Hide, Timeout 3S, 5S, or 7S.
STARTUP (L4).
Opens Startup Menu (Figure 32).
J7 VCOM (L5).
Opens Comm. Options (Figure 31); select Protocol: RS232 or RS422.
DATE (R1).
Opens Date Adjust Menu (Figure 29).
TIME (R2).
Opens Time Adjust Menu (Figure 30).
BACK (R5).
Returns to Main Menu (Figure 11).
SRC
T1
T2
RS232
or
rs422
B1
B2
Figure 28. UTILITY MENU
Dialogue box reads FACTORY RESET WILL OVERWRITE ALL SETTINGS WITH
Initiates Programmable Button (Select Key) Menu (Figure 34).
T3
T4
T5
B3
B4
B5
MPC-ML2DVR-UM(B) 3/2019
Date
R1
Time
R2
R3
R4
BACK
R5
39
Advertisement
