Advertisement
IBIT MENU (CONTINUED)
ERROR CODES
. If there are conflicts within the PSM, they may be indicated by the following
ERROR CODES (Table 7). The Error Code is displayed in the on-screen Error Log Mes-
sage. Example: 'ERROR 1 (IF ANY)'.
BACK (R5).
Returns to MAIN MENU (Figure 11).
ERROR
CODES
RAM ERROR
ROM ERROR
EEP ERROR
DVR ERROR
KEY
PWR
ERROR CODE EXPLANATION
A series of bit patterns are written across
the RAM.
The test fails if the pattern read
back at an address does not match the written
pattern.
Bootloader firmware or application firmware
validation failed. This could be due to a bad
checksum, file length or incorrect meta-data.
EEP file header was incorrect or communication
with the device failed.
Indicates there is a
with
DVR Module Communication Error.
Indicates there is a
with the Keys/Buttons Circuit.
Indicates there is a
with the Power
Table 7. Error CODES
This section is intentionally left blank.
failed communication
failed communication
failed communication
Module.
MPC-ML2DVR-UM(B) 3/2019
37
Advertisement
