Removing The Side Panels; Installing The Motherboard; Installing Pci-E/Pci Card(S); Installing The Psu - Corsair Carbide Series Installation Manual

CARBIDE SERIES
®

1. Removing the side panels

Simply remove the
thumbscrews then slide the
side panels back and out.
Note: CORSAIR recommends
removing both side panels and
setting them aside when building
your system to avoid accidental
damage. Both side panels are
interchangeable and should be
removed to reduce clutter.

2. Installing the motherboard

First, install your
motherboard's I/O shield
(see your motherboard's
manual for guidance).
88R STEP1
Align your motherboard with
the pre-installed standoff s.
Use the provided screws
b
to secure the
motherboard to the
motherboard tray.
5
88R

3. Installing PCI-e/PCI card(s)

Remove slot cover, install
expansion card, and secure
with screw(s) as necessary.
4. Installing the PSU (power supply unit)
Position the PSU on the
bottom of the case then align
the case holes and secure the
PSU with screws provided with
your power supply.
6