Installation Steps, Overview - Fujitsu PRIMERGY TX150 S6 Operating Manual

2

Installation steps, overview

This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, it is essential that you familiarize yourself with the safety infor-
mation in chapter
Ê Transport the server to the place where you want to set it up.
Ê Unpack all parts, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
Ê Make sure that all necessary manuals (see
page 8) are available; print out the PDF files if required.
Ê Set up the floorstand model (see section
on page 37) or install the rack model in the rack (see section
rack model" on page
Ê Wire the server. Follow the instructions in sections
the server" on page 60
page 63.
Ê Connect the server to the mains (see section
mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
Ê Configure the server and install the desired operating system and applica-
tions. The following options are available:
– Remote configuration and installation with ServerStart:
The ServerStart disc 1 supplied allows you to conveniently configure the
server and install the operating system.
Details on how to operate ServerStart, as well as some additional infor-
mation, are included in the "PRIMERGY ServerView Suite - ServerStart"
manual.
Configuration information can also be found in section
with ServerStart" on page
TX150 S6
"Important information" on page
"Unpacking the server" on page
40).
and "Notes on connecting/disconnecting cables" on
61).
"Controls and indicators" on page
79.
Operating Manual
23.
"Documentation overview" on
"Setting up the floorstand model"
"Connecting devices to
"Connecting the server to the
67).
"Configuration
36).
"Mounting the
21