Fujitsu PRIMERGY TX150 S6 Operating Manual page 50

Mounting the rack model
Figure 10: Fitting the rail in the Classic Rack
Ê Using the supplied Allen key (no. 5), secure the rails to the left and right
support uprights in the rack with two M5 screws each.
Note that the guide nubs on the telescopic rails must fit into the holes in the
support uprights next to the spring nuts.
Ê Repeat this procedure for the second telescopic rail.
Ê Insert the server (see section
50
"Inserting the server" on page
Operating Manual
Hardware installation
57).
TX150 S6