Assembly Instructions - Schwank deltaSchwank Series Technical Manual

9
Assembly
instructions

For the assembly of the heater is a
lifting platform with work surface from
min. 1.5m width and 4.0m length
necessarily.
For the assembly are needed 2
people.
Scope of delivery
deltaSchwank 310U / 320U
- 1x Reflector section combustion chamber
[FERAN]
- 1x Reflector end section L=440mm
- 1x Outer combustion chamber tube
140mm / L= 3050mm
- 1x Inner combustion chamber tube
stainless steel L= 1500mm
- 1x Radiant tube L= 3050mm with
turbulator [coloured ring marking]
- 2x Intermediate reflector
- 1x Mounting set deltaSchwank 310U / 320U
- 1x bluTek-burner kit in cardboard
[including bluTek-burner,
burner baffle + gasket]
deltaSchwank 625U / 635U
- 1x Reflector section combustion chamber
[FERAN]
- 1x Reflector section
- 1x Reflector end section L=440mm
- 1x Outer combustion chamber tube
140mm / L= 5950mm
- 1x Inner combustion chamber tube stainless
steel
deltaSchwank 625: L= 1500mm
deltaSchwank 635: L= 2500mm
- 1x Radiant tube L= 5950mm with 2x turbulator
[2x coloured ring marking]
- 2x Intermediate reflector
- 1x Mounting set deltaSchwank 625U / 635U
- 1x bluTek-burner kit in cardboard
[including bluTek-burner,
burner baffle + gasket]
deltaSchwank
tube 1
tube 2
tube 1
tube 2
25