Installing; Microscada User Account - ABB CAP 501 Installation And Commissioning Manual

CAP 501
Installation
3.3.2.9
3.3.2.10
24
Installation and Commissioning Manual

Installing

Once you have clicked the 'Start' button on the 'Select' dialog box, the progress of the
installation is displayed in a dialog box shown in Figure 9.
Figure 9. The 'Installing' dialog box
You may cancel the installation by clicking 'Cancel'.
Note! No support for a roll-back or uninstall is available meaning that you can not
revert to the configuration that existed prior to the installation of CAP 501.

MicroSCADA user account

If you are prompted for the MicroSCADA user password, you will see the dialog box
shown in Figure 10. The installation does not continue until you have closed this
dialog box.
Figure 10. The 'MicroSCADA User Password' dialog box.
Enter an appropriate password confirming it. Click 'OK' to apply it and to continue
with the installation. Other properties of the MicroSCADA user account are set
automatically during the creation of the account.
Note! In order to have a working installation of CAP 501, the MicroSCADA user
account must exist on your computer.
1MRS751270-MEN
ABB Automation