Destination Drive - ABB CAP 501 Installation And Commissioning Manual

CAP 501
Installation
3.3.2.8
22
Installation and Commissioning Manual
Figure 7. The 'Select' dialog box for a reinstallation.
This dialog box provides the following information:
•
The currently selected destination drive and the root directory under which the
software will be installed.
•
The amount of hard disk space that is required and available on the currently
selected destination drive.
The selected options have a check mark on their left side and are subject to install.
Clicking with the mouse on an option toggles its selection status.
To change the destination drive for the installation click 'Change Drive', see the
description of the 'Destination Drive' dialog box below. To view the previously
displayed 'System Information' dialog box, click '<<Back'. If you are satisfied with the
current settings, click 'Start' to start the actual software installation.

Destination Drive

This dialog box allows you to select the destination drive for the installation.
1MRS751270-MEN
ABB Automation