Additional Requirements - ABB CAP 501 Installation And Commissioning Manual

1MRS751270-MEN
2.1.3
ABB Automation
Installation and Commissioning Manual
Item
Processor Pentium
Memory 64 MB
Display SVGA, 800x600, 256 colours
File system Windows NT file system on the
installation drive
Hard disk space 150 MB
Serial ports Two COM ports
Parallel ports Optionally one parallel port for
printing
printing not available
CD-ROM Any device supported by the
operating system. Required for
installation
Mouse Any device supported by the
operating system
Network adapter Any device supported by the
card operating system
Table 4. CAP 501 hardware requirements.

Additional requirements

Table 5 lists the additional requirements set by CAP 501.
Item
User account You must be logged on to Windows NT with administrator rights in order
to install the software successfully, otherwise the installation is denied.
MicroSCADA The MicroSCADA service is not allowed to run in the background during
service the installation, otherwise the installation is denied.
Table 5. Additional requirements.
4
Pentium is a registered trademark of Intel Corporation.
Miminum
®
4
133 MHz
purposes, if network
Description
CAP 501
Requirements
Recommended
Pentium II 200 MHz
128 MB
SVGA, 1024x768, 256 colours
250 MB
11