Installing The Module - ABB OREL-01 User Manual

Installing the Module

Delivery Check
The option package contains:
• OREL-01 module
• Warning stickers in several languages
• This manual
Mounting
WARNING! Follow the safety instructions given in this guide and in the
ACS550 or ACH550 User's Manual.
To mount the OREL-01 module:
1. If not already off, remove mains power from the drive.
2. Remove the drive cover. (See instructions in the drive User's Manual.)
3. Insert the OREL-01 module's
plastic hooks into the front of
the drive at SLOT 1.
4. Carefully fit the connector at
the other end of the module
into the drive connector.
5. Press until the retaining clip
locks the module into position.
NOTE! Signal and power
connections to the drive are
automatically made through a
6-pin connector.
6. Non-English speaking
locations: Add a warning
sticker in the appropriate
language over the existing warning on the top of the module.
6
5
5
4
3
X0052
Installation