Installation Wizard; Welcome - ABB CAP 501 Installation And Commissioning Manual

CAP 501
Installation
3.3.2
3.3.2.1
16
Installation and Commissioning Manual
•
Select 'Run' and enter the following command in the 'Run' dialog box:
Y:\CAP501.EXE
•
Click 'OK' to start the CAP 501 installation.
If the initial checks are passed without any notifications, the installation enters directly
the Installation Wizard, which is explained in the following.

Installation Wizard

The software installation comprises a series of dialog boxes referred to as the
Installation Wizard, which guides you through the CAP 501 installation. The
installation can be exited virtually at any point by either clicking 'Exit' where available
or by pressing the <Esc> key from the keyboard. You will be prompted to confirm
that you actually wish to exit the installation prematurely.
Most of the information needed to install CAP 501 is gathered in the Installation
Wizard dialog box, thereafter the installation transfers the software onto your
computer. However, during the process of transferring the software, you may be
prompted for additional information depending on your computer configuration.
The following paragraphs describe in detail each of the Installation Wizard dialog
boxes in the order they appear during the installation.

Welcome

The 'Welcome' dialog box welcomes you to the CAP 501 installation, see Figure 1.
Figure 1. The 'Welcome' dialog box.
Click 'OK' to continue with the installation. To exit the installation, click 'Cancel'.
1MRS751270-MEN
ABB Automation