Overview The MGate 5103 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET network communications. Package Checklist Before installing the MGate 5103, verify that the package contains the following items: • 1 MGate 5103 gateway • 1 serial cable: DBL-RJ45F9-150 •...
1. Received invalid function code 2. Master accessed invalid register address or coil addresses 3. Received frame error (parity error, checksum error) When MGate 5103 acts as EtherNet/IP adapter: 1. Refuses connection due to incorrect configuration No connection with PROFINET I/O controller Green...
3. Use an Ethernet cable to connect the MGate to the PROFINET IO controller. 4. The MGate 5103 is designed to be attached to a DIN rail or mounted on a wall. For DIN-rail mounting, push down the spring and properly attach it to the DIN rail until it “snaps”...
Software Installation Information The MGate 5103 also supports login via a web browser. Default IP address: 192.168.127.254 Default account: admin Default password: moxa Pin Assignments Modbus Serial Port (Male DB9) RS-422/ RS-232 RS-485 (2W) RS-485 (4W) TxD-(A) – TxD+(B) –...
Shielded Power Power N.O. Common N.C. Power Power Ground Input 2 Input 2 Input 1 Input 1 Specifications Power Requirements Power Input 12 to 48 VDC Power Consumption 455 mA @ 12 VDC, 125 mA @ 48 VDC Operating Temperature Standard models: 0 to 60°C (32 to 140°F) Wide temp.
Page 7
ATTENTION For installations in hazardous locations (Class 1, Division 2): These devices are to be installed in an enclosure with a tool-removable cover or door, suitable for the environment. NOTE This equipment is suitable for use in Class 1, Division 2, Groups A, B, C, D or nonhazardous locations only WARNING EXPLOSION HAZARD...
Need help?
Do you have a question about the MGate 5103 and is the answer not in the manual?
Questions and answers