Moxa Technologies MGate 5109 Quick Installation Manual
  1. Manuals
  2. Brands
  3. Moxa Technologies Manuals
  4. Gateway
  5. MGate 5109
  6. Quick installation manual
Moxa Technologies MGate 5109 Quick Installation Manual

Moxa Technologies MGate 5109 Quick Installation Manual

Hide thumbs Also See for MGate 5109:
Table of Contents

Advertisement

Quick Links

Download this manual

Quick Installation Guide

Moxa Americas:
Toll-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax:
1-714-528-6778
Moxa Europe:
Tel:
+49-89-3 70 03 99-0
Fax:
+49-89-3 70 03 99-99
Moxa India:
Tel:
+91-80-4172-9088
Fax:
+91-80-4132-1045
MGate 5109
Version 1.2, March 2019
Technical Support Contact Information
www.moxa.com/support
 2019 Moxa Inc. All rights reserved.
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel:
+86-21-5258-9955
Fax:
+86-21-5258-5505
Moxa Asia-Pacific:
Tel:
+886-2-8919-1230
Fax:
+886-2-8919-1231
P/N: 1802051090011
*1802051090011*

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MGate 5109 and is the answer not in the manual?

Questions and answers

Related Manuals for Moxa Technologies MGate 5109

Summary of Contents for Moxa Technologies MGate 5109

  • Page 1: Quick Installation Guide

    MGate 5109 Quick Installation Guide Version 1.2, March 2019 Technical Support Contact Information www.moxa.com/support Moxa Americas: Moxa China (Shanghai office): Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: 1-714-528-6777 Tel: +86-21-5258-9955 Fax: 1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe: Moxa Asia-Pacific: Tel: +49-89-3 70 03 99-0...

  • Page 2: Package Checklist

    Overview The MGate 5109 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and DNP3 serial/TCP/UDP network communications. Package Checklist Before installing the MGate 5109, verify that the package contains the following items: • 1 MGate 5109 gateway • 1 serial cable: CBL-RJ45F9-150 •...

  • Page 3: Hardware Introduction

    2. Received a framing error (parity error, checksum error) 3. Timeout (the slave device sends no response) When the MGate 5109 acts as a Modbus slave: 1. Received an invalid function code The master accessed an invalid register address or coil address 2.

  • Page 4: Reset Button

    (such as a straightened paper clip) to hold the reset button down until the Ready LED stops blinking (approximately five seconds). Pull-high, Pull-low, and Terminator for RS-485 Beneath the MGate 5109’s top cover, you will find DIP switches to adjust each serial port’s pull-high resistor, pull-low resistor, and terminator.

  • Page 5: Hardware Installation Procedure

    3. Use an Ethernet cable to connect the MGate to the Modbus or DNP3 device. 4. The MGate 5109 is designed to be attached to a DIN rail or mounted on a wall. For DIN-rail mounting, push down the spring and properly attach it to the DIN rail until it “snaps”...

  • Page 6: Pin Assignments

    Pin Assignments Modbus Serial Port (Male DB9) RS-422/ RS-232 RS-485 (2W) RS-485 (4W) TxD-(A) – TxD+(B) – RxD+(B) Data+(B) RxD-(A) Data-(A) – – – – – – – – – *Signal ground Ethernet Port (RJ45) Signal Power Input and Relay Output Pinouts Shielded Power Power...
  • Page 7 1. DEMKO Certification number: 13 ATEX 1307610X IEC Certification Number: IECEx UL 13.0051X; 2. Ambient Temperature Range: 0°C to 60°C (for models without suffix –T) -40°C to 75°C (for models with suffix –T only) 3. Certification String: Ex nA nC IIC T3 Gc 4.
  • Page 8 WARNING EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING PROPERTIES OF MATERIALS USED IN THE FOLLOWING DEVICE: Sealed Relay Device U21. Moxa Inc. Fl. 4, No. 135, Lane 235, Baoqiao Rd. Xindian Dist., New Taipei City, 23145 Taiwan, R.O.C. - 8 -...

This manual is also suitable for:

Mgate 5109 series

Table of Contents