Password Keyboard - Datalogic TaskBook User Manual

Password Keyboard

The Password-Keyboard can be configured
like any other Keyboard.
A complete Keyboard (incl. Letters) can be
configured below the entry field.
The Password-Keyboard appears after
pressing onto the KEY-Button, if the
SysAdmin-Menu is not open. Another
push on the KEY-Button deletes the
password keyboard from the screen.
When configuring the password keyboards
2 Key codes are of particular importance:
VK_ESCAPE = Escape (deletes the KB from Screen)
VK_RETURN = input (entry) ready
After receiving VK_RETURN the Password will be proved.
If the password is wrong an error message appears.
If the password is correct, the SysAdmin-Keyboard will open.
Special Settings Password Keyboard
Special Keys for configuration of password keyboards in the
[Keyboard_XX] Section:
Key
KeyDialog=DlgInputLine
KeyDlgPassword=X
User's Manual
Default Info
To enable the Password entry, this key is
-
mandatory with the assigned registry.
For X any password can be defined. It is
only important, that all characters of the
-
password must be defined and shown in
the Password-Keyboard.
Software Keyboard
65