Section [Keys] - Datalogic TaskBook User Manual

Example:
FontDef = Arial,
FontMini = Tahoma,
FontSymbol = Wingdings, 0,29,0,0,0,190,190,190,

Section [Keys]

In this section the general and for all keyboards valid definition for
the layouts of the single keys will be specified.
Max. 40 individual Key-Layouts can be created.
Keyname Parameter
FontName,BMPNormal,BMPActive,TxtMode,IconMode,FrmXL,FrmYL,
KeyName FrmTxtNormL,T,R,B, FrmTxtActL,T,R,B, FrmIconNormL,T,R,B,
FrmIconActL,T,R,B
The various fields can be assigned as follows:
KeyName
FontName
BMPNormal
BMPActive
TxtMode
IconMode
FrmXL, FrmYL
User's Manual
0,26,0,0,0,190,190,190,
0,14,0,0,0,190,190,190,
This KeyName can arbitrarily be named. If the key will be
used later on the keyboard, the corresponding defined
KeyName must be specified.
The Fontname from the [Fonts] section to be used.
Bitmap for normal key display (not pressed).
Bitmap for active key display (pressed).
Here the orientation for the text output can be
determined, per default the text will be displayed always
horizontal and vertical centered in the key.
L=left-aligned, R=right-aligned, T=top, B=bottom.
Combinations like e.g. "LT" or "LB" are allowed.
Orientation for Icon-Positioning, identical to TxtMode.
Here special frame values for the allocation of Bitmaps
(BMPNormal + Active) can be set to create bigger or
smaller Buttons. Normally it isn't necessary and the
values should be left empty.
Software Keyboard
2,2,B
0,0,IB
0,0,B
55