Hazards During Installation - Datalogic TaskBook User Manual

Safety Instructions
Products with power packs
Only the power packs supplied by Datalogic may be used. The power
pack may only be replaced by qualified personnel.
Rated Voltage
Power

Hazards during installation

Transport/installation
The product may fall during transport or installation and cause injury.
Seek assistance from a second person.
Hazard due to a device bracket defect
The product should be installed in such a way that no persons can be
injured if the bracket is faulty. If necessary, appropriate safety
measures must be taken, e.g. installing a safety rope.
Installation on vehicles
The field of vision and operability of vehicles must not be impaired by
the installed product.
Environmental conditions and IP protection
Environmental conditions allowed must be observed. In order to
achieve the IP protection class, the cables and the cable cover must
be installed as described in
6
Internal power pack
7.2 V
18 Wh
Cable Cover Installation on page
Power pack with handgrip
7.4 V
19.24 Wh
94.
TaskBook