System-Admin And Password-Keyboard - Datalogic TaskBook User Manual

Software Keyboard

System-Admin and Password-Keyboard

The system admin menu or keyboard is always linked with the
upstream password entry.
The behaviour is defined as follows:
• If the SysAdmin-Menu is not active at pressing the
KEY-Button, always the entry password dialog appear.
• If the SysAdmin-Menu is active at pressing the KEY-Button
the normal Keyboards like usually will be fade in or fade out.
• If the SysAdmin-Menu will be exit, all normal open Keyboards
will be closed automatically.
Both keyboards in the [Common] section of the Keyboard Config can
be activated as follows:
SysAdminPwdKB=Num
SysAdminMenKB=Num
For Num the Number of the corresponding Keyboard-configuration
will be specified.
These Special-Keyboards, always should be specified after the
normal Keyboards.
If the Password-Keyboard for example is defined in the Section
[Keyboard_10] the above entry would look like: SysAdminPwdKB=10
Attention:
SysAdmin....KB session allows to define the keyboards that will be
loaded by the microcontroller at the boot. When the SysAdmin...KB
sessions are specified, the Login-Session will not be considered.
64 TaskBook