Section [Keyboard_Xx] - Datalogic TaskBook User Manual

Software Keyboard
FrmTxtNormL,T,R,B
FrmTxtActL,T,R,B
FrmIconNormL,T,R,B Position frame for the Icon output of normal keys.
FrmIconActL,T,R,B

Section [Keyboard_XX]

This section provides the actual definition of the keyboards. Max. 20
Keyboards (XX = 01-20) are possible for each Cfg-File. A Keyboard
Definition is only recognized as valid if at least the line "L01_Norm" is
defined in the section (see description below).
With horizontal screen orientation (Landscape), the default
definitions are read, for example, [Keyboard_01].
In vertical orientation (Portrait-Mode), first the system tries to read
the keyboard definition from the
Section [Keyboard_XX_Portrait],
[Keyboard_01_Portrait]
If nothing is defined in the Portrait-Section (at least L01_Norm) or
the section doesn't exist, the default landscape will be used.
56
Position frame for the text output in normal keys.
With the values L=Left,T=Top,R=Right,B=Bottom
substituting the distances of the text output to the side
edge. This is necessary so that the text will not be written
over the 3D-Frame of a key by left-aligned output.
Position frame for the text output at active/pressed keys.
The frame for the active Display will be specified in 1-3
Pixel (depends on key size). In this case the effect of a
pressed key will appear.
Position frame for the Icon output of active/pressed keys.
for example from
TaskBook