Star Micronics TSP400 Series User Manual page 5

Paper roll
Fig. 1-4
Release bar
Paper guide
roller shaft
Fig. 1-5
Fig. 1-6
5 Temporarily place the paper roll on
6 Pull on the green release bar so that
Print head unit
7 Insert the paper so that it passes
8 Push the paper until the edge moves
– 2 –
the printer cover. Be sure that the
roll is correctly oriented for load-
ing.
it unlocks, then tilt the print head
unit. Avoid touching the print head
with your fingers.
under the paper-guide roller shaft
and between the transmissive sen-
sors.
all the way through to the tear bar.