Commands And Status Lists - Star Micronics TCP300II Series Product Specifications Manual

3-9.

Commands and Status Lists

(1) Command List
Code
21h First track read command
22h Second track read command
23h Third track read command
25h First track read (status with no card) command
26h Second track read (status with no card) command
27h Third track read (status with no card) command
29h First track buffer read command
2Ah Second track buffer read command
2Bh Third track buffer read command
35h Reverse 7 bit format first track data setting command
36h Reverse 7 bit format second track data setting command
37h Reverse 7 bit format third track data setting command
38h 7 bit format first track data setting command
39h 7 bit format second track data setting command
3Ah 7 bit format third track data setting command
3Bh First track data setting command
3Ch Second track data setting command
3Dh Third track data setting command
31h Magnetic strip write → idle command
32h Magnetic strip write → idle (status with no card) command
40h Print expansion buffer clear command
49h Buffer clear command
41h Print data setting command
42h Embedded image data 1 expand command
43h External image data expand command (line mode)
44h Two-byte external character font register command
45h Single-byte external character font register command
46h Delete + print → discharge command
47h Print → discharge command
48h Delete → discharge command
4Dh External data expand command (block mode)
4Eh Bar code data setting command
50h Card discharge command
53h Card front idle command
51h Card back idle command
54h Card insertion wait status cancel command
55h Card removal wait status cancel command
Content of Command
*1
Data format set by EEPROM.
9
Applicable
Class
Models
310
300/310
310
310
300/310
310
310
300/310
310
Magnetic stripe
310
commands
300/310
310
310
300/310
310
310
300/310
310
300/310
300/310
Print, delete
commands
*3
*3
Card
commands