PRODUCT OVERVIEW
LED Descriptions
The top panel on the modem contains the following LEDs:
Link LED - The Link LED indicates that power is present when continuously lit and the device is registered on
the network when blinking.
Signal LEDs - Signal strength LEDs are not pre-programmed. Use the AT#GPIO command to program these
LEDs. For details, refer to the AT Commands Reference Guide.
Power Draw
Radio
Voltage
LTE
5V
Note:
Multi-Tech Systems, Inc. recommends that you incorporate a 10% buffer into your power source
when determining product load.
TX Pulse: The average peak current during an LTE connection.
Maximum Power:The continuous current during maximum data rate with the radio transmitter at
maximum power.
InRush Current: The total inrush charge at power on.
8
"Live"
Cellular Call
Connection
Box
Idle Current
Connection
No Data
51 mA
66 mA
(AVG)
TX Pulse
Measured
(AVG) Peak
Current
Current
(Amps) at
Max Power
150 mA
368 mA
QuickCarrier
Total Inrush
Total
Charge
Inrush
measured in
Charge
MilliCoulombs
Duration
(mC)
during
Powerup
(Inrush
Duration)
.152 mC
34.7 uS
®
USB-D MTD-MNA1 User Guide