UniView
Ref Window
Description
•
•
2
Capnography
•
•
3
Infusion Pump
•
•
4
SedLine
•
•
O3 Regional
5
Oximeter (Forehead
•
Right)
•
O3 Regional
6
Oximeter (Forehead
•
Left)
•
7
Third-Party Monitor
•
•
8
rainbow
•
Masimo Corporation
Displays one capnography device.
Window expands when pump devices
are disconnected or powered off.
Refer to the appropriate device
operator's manual for more
information.
Refer to the appropriate device
operator's manual for more
information.
Displays one SedLine device.
Window expands when O3 Regional
Oximeter devices are disconnected
from Root.
Refer to the appropriate device
operator's manual for more
information.
Forehead Right sensor data is
displayed left side of screen.
Refer to the appropriate device
operator's manual for more
information.
Forehead Left sensor data is displayed
right side of screen.
Refer to the appropriate device
operator's manual for more
information.
Refer to the appropriate device
operator's manual for more
information.
Displays multi-parameter rainbow
parameter measurements from a
Masimo device.
Window expands when the
third-party monitor is disconnected
or powered off.
Refer to the appropriate device
operator's manual for further
information.
Parameter/Waveform Displayed
•
EtCO
, FiCO
, RR
2
2
•
CO
waveform
2
•
INVTB
•
INVI
•
INRT
•
INRMT
•
PSi, EMG, SR, SEFL, SEFR, ARTF
•
EEG waveform
•
rSO
, Delta Baseline (Δbase), Delta
2
SpO
(ΔSpO
)
2
2
•
rSO
, Delta Baseline (Δbase), Delta
2
SpO
(ΔSpO
)
2
2
•
Temperature, NiBP Systolic, NiBP
Diastolic, ECG HR, PVC, CVP, ST
aVL, ST aVR
Note: Parameters displayed if available
by device.
•
The first 8 parameters are
displayed (based on priority)
•
Pleth, Signal IQ, and Resp Env
waveforms
www.masimo.com
Chapter 2: Operation
Window Visibility
•
Visible when capnography
device is connected
•
Visible when pump device is
connected
•
Always visible
•
Visible when an O3 sensor is
connected
•
Visible when an O3 sensor is
connected
•
Visible when connected
•
Always visible
•
Expands if third-party monitor
is not connected
16
Need help?
Do you have a question about the UniView and is the answer not in the manual?