Troubleshooting - FRIGOGLASS CMV 375 HC User Manual

Do not damage the refrigerant circuit.

6. Troubleshooting

ALL ACCESS TO THE COOLING SYSTEM AND ELECTRICAL PARTS
(CHANGING A LAMP OR REFRIGERATION DECK) MUST BE PERFORMED
BY AUTHORIZED PERSONNEL ONLY.
•
UNPLUG THE COOLER PRIOR TO ANY MAINTENANCE OR SERVICE
OPERATIONS. REMOVE THE PLUG AND MAKE SURE THAT THE
OPERATOR CAN CHECK FROM ANY OF THE POINTS WHICH HE HAS
ACCESS THAT THE CABLE IS UNPLUGGED.
•
After maintenance operations, make sure that the grounding
connections are in place before assembling the covers. Make sure you
use the same fastening components and covers.
•
If any electrical components need to be replaced, use only the identical
components in the spare part list supplied by the technical service
department of Frigoglass.
•
Keep the glass door on the back side of the cooler closed during
maintenance. The appliance will not stand stable when the compressor
is disassembled. If the compressor needs to be replaced, use adequate
support on the front side of the cooler.
•
After maintenance operations make sure that the strain relief, which
supports the supply cord, is assembled properly.
The ICMs are equipped with HC refrigerant. All service operations on
cooling mechanism & gas charging should be performed in a well
ventilated environment or in open air. Do not smoke during
maintenance.
ENG
13