Page 1 500L 2 0 1 5 O W N E R ’ S M A N U A L...
Page 2 This manual illustrates and describes the operation of VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. . . 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..7 HOW TO USE THIS MANUAL ....5 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
4 INTRODUCTION The enclosed Warranty Information lists the services that INTRODUCTION FCA US LLC offers to its customers: Congratulations on selecting your new vehicle. Be as- sured that it represents precision workmanship, distinc- • The Warranty Certificate with terms and conditions for tive styling, and high quality - all essentials that are maintaining its validity traditional to our vehicles.
Page 7: How To Use This Manual
INTRODUCTION 5 HOW TO USE THIS MANUAL Consult the Table of Contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle’s equipment. The detailed index at the back of this Owner’s Manual contains a complete listing of all subjects.
Page 8 6 INTRODUCTION...
Page 9: Vehicle Identification Number
INTRODUCTION 7 WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information.
Page 10: Vehicle Modifications/Alterations
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A WORD ABOUT YOUR KEYS ... . .11 ▫ Central Lock/Unlock (Switch Safe Lock Device) — If Equipped ....16 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS ......21 ▫ Important Safety Precautions ....31 ▫...
Page 13: A Word About Your Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 NOTE: The authorized dealer that sold you your vehicle A WORD ABOUT YOUR KEYS has the key code numbers for your vehicle locks. These The Key Fob contains the Remote Keyless Entry (RKE) numbers can be used to order duplicate keys from your transmitter with an integrated key.
Page 14 12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The ignition switch is fitted with a safety system that requires WARNING! the ignition key to be turned back to STOP if the engine does not start, before the starting operation can be repeated. •...
Page 15: Locking Doors With A Key
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 SENTRY KEY® CAUTION! The Sentry Key® Immobilizer System prevents unau- An unlocked car is an invitation to thieves. Always thorized vehicle operation by disabling the engine. The remove the key from the ignition and lock all the system does not need to be armed or activated.
Page 16: Replacement Keys
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: When having the Sentry Key® Immobilizer CAUTION! System serviced, bring all vehicle keys with you to an authorized dealer. • Always remove the Sentry Key® from the vehicle and lock all doors when leaving the vehicle unat- General Information tended.
Page 17: Vehicle Security Alarm
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 3. The horn will sound and the Vehicle Security Light in VEHICLE SECURITY ALARM the instrument cluster will switch on for approxi- The Vehicle Security Alarm monitors the vehicle doors mately 3 seconds. This shows that the Vehicle Security for unauthorized entry and the ignition switch for unau- Alarm is arming.
Page 18: To Disarm The System
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the Vehicle Security Alarm sounds the horn a second Vehicle Security Alarm will arm unexpectedly. If you time even when all doors, hood and liftgate are correctly remain in the vehicle and lock the doors with the RKE closed, a fault has occurred in the operation of the transmitter, once the Vehicle Security Alarm is armed, system.
Page 19 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 We recommend that you activate the Safe Lock device Activating The Safe Lock Device each time you park your car. The Safe Lock device is enabled on all the doors by quickly double-pushing the LOCK button on the RKE transmitter.
Page 20: Remote Keyless Entry (Rke)
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE KEYLESS ENTRY (RKE) This system allows you to lock or unlock the doors and liftgate from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmit- ter.
Page 21: To Unlock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 To Unlock The Doors And Liftgate Programming Additional Transmitters Push and release the UNLOCK button on the RKE Refer to “Sentry Key®” in “Things To Know Before transmitter once to unlock the driver’s door or twice, Starting”...
Page 22: Replacing The Battery In The Key With Remote Control
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To replace the battery, proceed as follows: Replacing The Battery In The Key With Remote Control • Push button A to open the metal insert B; • Turn the screw C to Unlock using a small screwdriver; •...
Page 23: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 2. Closeness to a radio transmitter such as a radio station General Information tower, airport transmitter, and some mobile or CB This device complies with Part 15 of the FCC rules and radios.
Page 24 22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: With central locking active (LED ON), opening one of the front doors, it is possible to perform a central unlocking (LED OFF). With central locking active (LED ON), in order to open one of the rear passenger doors, it is necessary pulling the internal door handle twice.
Page 25 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 WARNING! WARNING! (Continued) others could be seriously or fatally injured. Chil- • Do not leave children or animals inside parked dren should be warned not to touch the parking vehicles in hot weather. Interior heat build-up may brake, brake pedal or the transmission gear selec- cause serious injury or death.
Page 26: Doors Lock With One Or More Doors Open
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Doors Lock With One Or More Doors Open Child-Protection Door Lock System — Rear Doors It is possible locking the vehicle through the RKE, internal button or external key pawl, also if one or more To provide a safer environment for small children riding doors are open.
Page 27: Power Windows
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 POWER WINDOWS WARNING! Power Window Switches Avoid trapping anyone in a vehicle in a collision. The power window controls are located on the driver’s Remember that the rear doors can only be opened door trim panel.
Page 28 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The power window switches will remain active for up to three minutes after the ignition switch is cycled to the OFF position. Opening either front door will cancel this feature. WARNING! Never leave children unattended in a vehicle, and do not let children play with power windows.
Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Auto-Down NOTE: The window switches have an Auto-Down feature. Push • If the window runs into any obstacle during auto- the window switch for approximately one second, re- closure, it will reverse direction and then go back lease, and the window will go down automatically.
Page 30: Wind Buffeting
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Resetting The Auto Up Feature Wind Buffeting Should the “Auto Up” feature stop working, the window Wind buffeting can be described as the perception of probably needs to be reset. To reset “Auto Up”: pressure on the ears or a helicopter-type sound in the ears.
Page 31: Liftgate Emergency Release
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 Liftgate Emergency Release WARNING! As a security measure, a Liftgate Emergency Release is • Driving with the liftgate open can allow poisonous built into the liftgate latching mechanism. To access the exhaust gases into your vehicle. You and your Liftgate Emergency Release proceed as follows: passengers could be injured by these fumes.
Page 32 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. With the screwdriver remove the tab of yellow 4. Introduce the screwdriver into the seat B in order to color (A) trigger the release tab of the trunk (follow the direction arrow to open) Yellow Tab Location Release Tab...
Page 33: Occupant Restraint Systems
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 2. If a child from 2 to 12 years old (not in a rear-facing OCCUPANT RESTRAINT SYSTEMS child restraint) must ride in the front passenger seat, Some of the most important safety features in your move the seat as far back as possible and use the vehicle are the restraint systems: proper child restraint.
Page 34: Seat Belt Systems
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. All occupants should always wear their lap and WARNING! shoulder belts properly. • Never place a rear-facing child restraint in front of 7. The driver and front passenger seats should be moved an air bag.
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Research has shown that seat belts save lives, and they Initial Indication can reduce the seriousness of injuries in a collision. Some If the driver is unbuckled when the ignition switch is first of the worst injuries happen when people are thrown turned to the AVV/START or MAR/RUN position, an from the vehicle.
Page 36 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE BeltAlert Warning Sequence Change Of Status The BeltAlert warning sequence is activated when the If the driver or outboard front seat passenger (if vehicle is moving above a specified vehicle speed range equipped with outboard front seat passenger BeltAlert) and the driver or outboard front seat passenger is un- unbuckles their seat belt while the vehicle is traveling,...
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 NOTE: If BeltAlert has been deactivated and the driver WARNING! or outboard front seat passenger is unbelted the Seat Belt Reminder Light will turn on and remain on until the • Relying on the air bags alone could lead to more driver and outboard front seat passenger seat belts are severe injuries in a collision.
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • Do not allow people to ride in any area of your • A lap belt worn too high can increase the risk of vehicle that is not equipped with seats and seat injury in a collision.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 WARNING! (Continued) WARNING! (Continued) • A seat belt that is too loose will not protect you • A shoulder belt placed behind you will not protect properly. In a sudden stop, you could move too far you from injury during a collision.
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, and next to your arm in the rear seat (for vehicles equipped with a rear seat).
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Inserting Latch Plate Into Buckle Positioning The Lap Belt 4. Position the lap belt so that it is snug and lies low 5. Position the shoulder belt across the shoulder and across your hips, below your abdomen. To remove chest with minimal, if any slack so that it is comfort- slack in the lap belt portion, pull up on the shoulder able and not resting on your neck.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE position. If necessary, slide the latch plate down the Seat Belts And Pregnant Women webbing to allow the seat belt to retract fully. Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Position the lap belt snug and low below the abdomen The pretensioners are triggered by the Occupant Re- and across the strong bones of the hips. Place the straint Controller (ORC). Like the air bags, the preten- shoulder belt across the chest and away from the neck.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Switchable Automatic Locking Retractor (ALR) — If Equipped The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor (ALR) which is used to secure a child restraint system. For additional information, refer to “Installing Child Restraints Using The Vehicle Seat Belt”...
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 around the occupant’s mid-section so as to not activate WARNING! the ALR. If the ALR is activated, you will hear a clicking sound as the seat belt retracts. Allow the webbing to •...
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Engage The Automatic Locking Mode WARNING! 1. Buckle the combination lap and shoulder belt. • The seat belt assembly must be replaced if the 2. Grasp the shoulder portion and pull downward until switchable Automatic Locking Retractor (ALR) fea- the entire seat belt is extracted.
Page 47: Supplemental Restraint System (Srs)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 • Seat Belt Pretensioners Supplemental Restraint System (SRS) Air Bag System Components • Seat Belt Buckle Switch Your vehicle may be equipped with the following air bag • Seat Track Position Sensors system components: Advanced Front Air Bags •...
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Advanced Front Air Bag Features the driver or front passenger seat belt is buckled. The seat belt buckle switch may adjust the inflation rate of the The Advanced Front Air Bag system has multistage Advanced Front Air Bags.
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Because air bag sensors measure vehicle deceleration Knee Impact Bolsters over time, vehicle speed and damage by themselves are The Knee Impact Bolsters help protect the knees of the not good indicators of whether or not an air bag should driver and front passenger, and position the front occu- have deployed.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Supplemental Driver Knee Air Bag This vehicle is equipped with a Supplemental Driver Knee Air Bag mounted in the instrument panel below the steering column. The Supplemental Driver Knee Air Bag provides enhanced protection during a frontal impact by working together with the seat belts, pretensioners, and Advanced Front Air Bags.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the SAB deploys, it opens the seam on the outboard side of the seatback’s trim cover. The inflating SAB deploys through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure occupants if they are not seated properly, or if items are positioned in the area where the SAB inflates.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 SABICs may help reduce the risk of head or other injuries WARNING! to front and rear seat outboard occupants in certain side impacts and/or vehicle rollover events, in addition to the • Your vehicle is equipped with left and right injury reduction potential provided by the seat belts and Supplemental Side Air Bag Inflatable Curtains body structure.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABICs and SABs (“Side Air Bags”) are designed to Seat belts (and child restraints where appropriate) are activate in certain side impacts and certain rollover necessary for your protection in all collisions. They also events.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Side Air Bags deploy independently; a left side impact WARNING! (Continued) deploys the left Side Air Bags only and a right side • Relying on the Side Air Bags alone could lead to impact deploys the right Side Air Bags only.
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Side Air Bags will not deploy in all rollover events. If you do have a collision which deploys the air bags, any The rollover sensing system determines if a rollover or all of the following may occur: event may be in progress and whether deployment is •...
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 irritation, rinse the area with cool water. For nose or NOTE: throat irritation, move to fresh air. If the irritation • Air bag covers may not be obvious in the interior trim, continues, see your doctor.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Turn on the interior lights, which remain on as long as Depending on the nature of the event the left and right the battery has power or for 15 minutes from the turn signal lights, located in the instrument panel, may intervention of the Enhanced Accident Response Sys- both be blinking and will continue to blink.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Customer Action Customer Will See Customer Action Customer Will See 4. Turn Left Turn Signal Left Turn Light Is ON 8. Turn Ignition OFF. Switch ON. SOLID. Right Turn Signal 9. Turn Hazard Flashers System is now reset and Light BLINKS.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light the MAR/ACC/ON/RUN position. After the self-check, the Air Bag Warning Light will turn off. If the ORC The air bags must be ready to inflate for your detects a malfunction in any part of the system, it turns protection in a collision.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 • The Air Bag Warning Light remains on after the four to WARNING! eight-second interval. Ignoring the Air Bag Warning Light in your instru- • The Air Bag Warning Light comes on intermittently or ment panel could mean you won’t have the air bags remains on while driving.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Event Data Recorder (EDR) These data can help provide a better understanding of the circumstances in which crashes and injuries occur. This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in NOTE: EDR data are recorded by your vehicle only if a certain crash or near crash-like situations, such as an air non-trivial crash situation occurs;...
Page 63: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Child Restraints WARNING! (Continued) Everyone in your vehicle needs to be buckled up at all great that you could not hold the child, no matter times, including babies and children. how strong you are. The child and others could be badly injured.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • For additional information, refer to www.seatcheck.org or call 1–866–732–8243. • Canadian residents should refer to Transport Cana- da’s website for additional information: http:// www.tc.gc.ca/eng/motorvehiclesafety/safedrivers- childsafety-index-53.htm Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and...
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Larger Children Children who have out-grown their Belt Positioning Booster Seat and the ve- forward-facing child restraint, but are too hicle seat belt, seated in the rear seat of the small to properly fit the vehicle’s seat belt vehicle Children Too Large...
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE for children who are over two years old or who have WARNING! outgrown the rear-facing weight or height limit of their rear-facing convertible child seat. Children should remain • Never place a rear-facing child restraint in front of in a forward-facing child seat with a harness for as long as an air bag.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Children Too Large For Booster Seats WARNING! Children who are large enough to wear the shoulder belt • Improper installation can lead to failure of an infant comfortably, and whose legs are long enough to bend or child restraint.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Is the lap part of the belt as low as possible, touching WARNING! the child’s thighs and not their stomach? Never allow a child to put the shoulder belt under an 5.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors And Tethers For Children (LATCH) has three vehicle anchor points for installing LATCH- Restraint System equipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 LATCH Positions For Installing Child Restraints In This Vehicle Lower Anchorage Symbol 2 anchorages per • seating position Top Tether Anchorage Symbol •...
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + 65 lbs (29.5 kg) Use the LATCH anchorage system until weight of the child restraint) for using the the combined weight of the child and the LATCH anchorage system to attach the child restraint is 65 lbs (29.5 kg).
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Can two child restraints be attached using Never “share” a LATCH anchorage with a common lower LATCH anchorage? two or more child restraints. If the center position does not have dedicated LATCH lower anchorages, use the seat belt to in- stall a child seat in the center position next to a child seat using the LATCH anchor-...
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Locating The Upper Tether Anchorages There are tether strap anchorages behind each rear seating position located on the back of the seat, near the floor. Tether Anchorage Routing Position LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE tether strap. The tether strap will have a hook at the end Always follow the directions of the child restraint to attach to the top tether anchorage and a way to tighten manufacturer when installing your child restraint.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 2. Place the child seat between the lower anchorages for 5. Tighten all of the straps as you push the child restraint that seating position. For some second row seats, you rearward and downward into the seat. Remove slack may need to recline the seat and / or raise the head in the straps according to the child restraint manufac- restraint to get a better fit.
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE behind the child restraint, route the seat belt through the Installing Child Restraints Using The Vehicle Seat child restraint belt path and then buckle it. Do not lock Belt the seat belt. Remind all children in the vehicle that the The seat belts in the passenger seating positions are seat belts are not toys and that they should not play with equipped with a Switchable Automatic Locking Retractor...
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle • ALR = Switchable Automatic Locking Retractor...
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + Weight limit of the Always use the tether anchor when using weight of the child restraint) for using the Child Restraint the seat belt to install a forward facing Tether Anchor with the seat belt to attach a child restraint, up to the recommended forward facing child restraint?
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Installing A Child Restraint With A Switchable 5. To lock the seat belt, pull down on the shoulder part of Automatic Locking Retractor (ALR) the belt until you have pulled all the seat belt webbing out of the retractor.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE strap. See the section “Installing Child Restraints WARNING! (Continued) Using the Top Tether Anchorage” for directions to tether strap of a rear-facing car seat to the tether attach a tether anchor. anchorage that is approved for that seating position, 9.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position, move the child restraint to another position in the vehicle if one is available.
Page 84: Transporting Pets
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS WARNING! A long break-in period is not required for the engine and • An incorrectly anchored tether strap could lead to drivetrain (transmission and axle) in your vehicle. increased head motion and possible injury to the Drive moderately during the first 300 miles (500 km).
Page 85: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 CAUTION! WARNING! Never use Non-Detergent Oil or Straight Mineral Oil • Do not leave children or animals inside parked in the engine or damage may result. vehicles in hot weather. Interior heat build-up may cause serious injury or death.
Page 86: Exhaust Gas
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the WARNING! engine running, adjust your heating or cooling Exhaust gases can injure or kill. They contain carbon controls to force outside air into the vehicle.
Page 87: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Air Bag Warning Light Safety Checks You Should Make Inside The Vehicle The light should come on and remain on for Seat Belts four to eight seconds as a bulb check when the Inspect the seat belt system periodically, checking for ignition switch is first turned ON.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Floor Mat Safety Information WARNING! (Continued) Always use floor mats designed to fit the footwell of your • Never put floor mats or other floor coverings on top vehicle. Use only floor mats that leave the pedal area of already installed floor mats.
Page 89: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Door Latches Periodic Safety Checks You Should Make Outside The Vehicle Check for proper closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 91 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS MIRRORS ......92 ▫ Rear Seats ......102 ▫...
Page 92 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Turn Signals ......115 ▫ To Resume Speed .....126 ▫...
Page 93 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 ▫ Programming A Rolling Code ... . .139 CIGAR LIGHTER — IF EQUIPPED ..151 ▫...
Page 94: Mirrors
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the wind- shield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting.
Page 95: Automatic Dimming Mirror - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pushing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated.
Page 96: Conversation Mirror - If Equipped
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To gain access to the conversation mirror, pull downward Conversation Mirror — If Equipped on the mirror to the open position. There is a conversation mirror located at the top of the overhead console. Conversation Mirror Conversation Mirror Location...
Page 97: Power Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Power Mirrors The power mirror controls are located on the driver’s door trim panel. To adjust a mirror, turn the control knob toward the left or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move.
Page 98: Heated Mirrors - If Equipped
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature can be activated whenever you turn on the rear window defroster. Sun Visors The driver and passenger sun visors are located on the headliner, near the front windshield.
Page 99: Seats
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 To use the “Slide-On-Rod” feature, rotate the sun visor SEATS downward and unclip it. Pull the sun visor along the Front Seats “Slide-On-Rod” until the sun visor is in the desired position. Forward/Rearward Adjustment The adjusting bar is located at the front of the seats, near the floor.
Page 100 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Seat Height Adjustment Recliner Adjustment The recline lever is located on the outboard side of the seat. The seat height adjustment lever is located on the out- To recline the seat, lean forward slightly, lift the lever, lean board side of the seat.
Page 102 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Lumbar — If Equipped WARNING! Push the power lumbar switch to adjust the lumbar • Adjusting a seat while the vehicle is moving is support. Release the switch when you reach the desired dangerous.
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 Heated Seats — If Equipped NOTE: Once a heat setting is selected, heat will be felt within two to five minutes. On some models, the front driver and passenger seats may be equipped with heaters in both the seat cushions WARNING! and seatbacks.
Page 104: Rear Seats
102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE While sitting in the seat, lift up on the bar and move the Rear Seats seat forward or rearward. Release the bar once the Rear Seats Forward/Rearward Adjustment desired position is reached. Then, using body pressure, The adjusting bar is located at the front of the seats, near move forward and rearward on the seat to be sure that the floor.
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Reclining Rear Seats WARNING! The recliner handle is located on the outside of the seat Do not ride with the seatback reclined so that the cushion. To adjust the seatback, lift upward on the shoulder belt is no longer resting against your chest.
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. Lift the seatback release lever located on the upper outboard side of the seat. Seatback Folded 3. Locate the seatback recline lever on the outboard side of the seat and lift upward on the lever. Seatback Release Lever 2.
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Seatback Recline Lever Folding Rear Seat 4. Slowly flip the entire seat forward. 5. Slowly flip the entire seat rearward and firmly lock the seat into position. 6. Raise the rear seatback and firmly lock the seatback into position.
Page 108: Head Restraints
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Armrest — If equipped To use the armrest, lower it downward. Armrest Cupholder Head Restraints Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear- Folding Rear Seat Armrest impact.
Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Reactive Head Restraints — Front Seats WARNING! The front driver and passenger seats are equipped with The head restraints for all occupants must be prop- Reactive Head Restraints. In the event of a rear impact erly adjusted prior to operating the vehicle or occu- the Reactive Head Restraints will automatically extend pying a seat.
Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • A loose head restraint thrown forward in a colli- sion or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow removed head restraints in a location outside the occupant compartment.
Page 111 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Rear Head Restraints To remove the outboard head restraints, raise it as far as it can go then push the adjustment button, and the release The rear seats are equipped with adjustable head re- button at the base of each post while pulling the head straints, the outboard head restraints have two comfort restraint up.
Page 112: Opening And Closing The Hood
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! ALL the head restraints MUST be reinstalled in the vehicle to properly protect the occupants. Follow the re-installation instructions above prior to operating the vehicle or occupying a seat. OPENING AND CLOSING THE HOOD To open the hood, two latches must be released to open the hood.
Page 113 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 1. Pull the hood release lever located under the left side 2. Move to the outside of the vehicle and push the red of the instrument panel. safety catch lever to the left and raise the hood. The safety catch lever is located under the center front edge of the hood.
Page 114: Lights
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS CAUTION! Multifunction Lever To prevent possible damage, do not slam the hood to The multifunction lever, located on the left side of the close it. Lower the hood until it is open approxi- steering wheel, controls the operation of the headlights, mately 6 inches (15 cm), and then drop it.
Page 115: Headlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Multifunction Lever Headlight Operation NOTE: When the headlights are turned on, the Daytime Headlights Running Lights will be deactivated. Rotate the end of the multifunction lever up- ward to the first detent for headlight operation.
Page 116: Daytime Running Lights - If Equipped
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Daytime Running Lights — If Equipped Flash-To-Pass To activate the Daytime Running Lights (DRL), rotate the You can signal another vehicle with your headlights by end of the multifunction lever to the O symbol. partially pulling the multifunction lever toward the steer- ing wheel.
Page 117: Turn Signals
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Turn Signals Follow Me Home/Headlight Delay Move the multifunction lever up or down and the arrows When this feature is selected the driver can choose to on each side of the instrument cluster flash to show have the headlights remain on for a preset period of time.
Page 118: Front Fog Lights - If Equipped
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Fog Lights — If Equipped The fog light switch is located on the center stack of the instrument panel, just below the radio. Push the switch once to turn the front fog lights on. Push the switch a second time to turn the front fog lights off.
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Push the switch to the off/left position from its center Leave the switch in the center position, and the lights are position and the lights are always off. turned on and off when the doors are opened or closed. Off/Left Position Center Position...
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The switches on the left and right sides of the overhead CAUTION! console controls the map or reading function of the lights. Push the switch to the right to turn on the right light and Before getting out of the vehicle be sure that the push the switch to the left to turn on the left light.
Page 121: Windshield Wipers And Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 • When the doors are unlocked with the Key Fob a 10 Front Windshield Wiper Operation second timer is activated. There are five different modes of operation for the front windshield wipers. The windshield wiper lever can be •...
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Wiper Off Manual High Speed/Mist Push the lever upward from the off position. The wipers This is the normal position of the wiper lever. will operate at high speed to clear off road mist or spray from a passing vehicle.
Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 CAUTION! • Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. •...
Page 124: Rear Window Wiper/Washer
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Window Wiper/Washer Activation Rotate the windshield wiper lever center ring upwards to operate the rear window wiper as follows: • In intermittent mode when the front windshield wiper is not operating. • In synchronous mode (at half the speed of the front window wiper) when the front windshield wiper is operating.
Page 125: Tilt/Telescoping Steering Column
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located on the steering column, below the turn signal lever.
Page 126: Electronic Speed Control
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To unlock the steering column, pull the control handle ELECTRONIC SPEED CONTROL down. To tilt the steering column, move the steering When engaged, the Electronic Speed Control takes over wheel upward or downward as desired. To lengthen or accelerator operations at speeds greater than 25 mph shorten the steering column, pull the steering wheel (40 km/h).
Page 127: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 NOTE: In order to ensure proper operation, the Elec- tronic Speed Control system has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control system can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
Page 128: To Set A Desired Speed
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate WARNING! A soft tap on the brake pedal, pushing the CANC button, Leaving the Electronic Speed Control system on or normal brake pressure while slowing the vehicle will when not in use is dangerous. You could accidentally deactivate Electronic Speed Control without erasing the set the system or cause it to go faster than you want.
Page 129: To Vary The Speed Setting
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Metric Speed (km/h) To Vary The Speed Setting To Increase Speed • Pushing the RES (+) button once will result in a 1 km/h increase in set speed. Each subsequent tap of When the Electronic Speed Control is set, you can in- the button results in an increase of 1 km/h.
Page 130: To Accelerate For Passing
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The speed decrement shown is dependant on the selected To Accelerate For Passing speed unit of U.S. (mph) or Metric (km/h): Push the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. U.S.
Page 131: Rear Park Assist - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Rear Park Assist is automatically activated when the WARNING! transmission is placed into REVERSE. As the distance from an obstacle behind the vehicle decreases, the au- Electronic Speed Control can be dangerous where the dible alert becomes more frequent.
Page 132: Rear Park Assist Sensors
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Park Assist Sensors Rear Park Assist Audible Alerts The four Rear Park Assist sensors, located in the rear If an obstacle is behind the vehicle when the transmission fascia/bumper, monitor the area behind the vehicle that is placed into REVERSE, an audible alert is activated.
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Audible And Visual Signals Supplied By The Rear Park Assist System SIGNAL MEANING INDICATION Obstacle An obstacle is present within the Audible signal (dashboard loudspeaker) Distance sensors’ field of view • Sound pulses emitted at a rate that increases as the distance decreases.
Page 134: Failure Indications
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE While audible signals are emitted, the audio system is not Refer to Electronic Vehicle Information Center (EVIC) in muted. “Understanding Your Instrument Panel” for further information. The audible signal is turned off immediately if the distance increases.
Page 135: Cleaning The Rear Park Assist System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • Clean the Rear Park Assist sensors regularly, taking Cleaning The Rear Park Assist System care not to scratch or damage them. The sensors must Clean the Rear Park Assist sensors with water, car wash not be covered with ice, snow, slush, mud, dirt or soap and a soft cloth.
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! • Rear Park Assist is only a parking aid and it is • Drivers must be careful when backing up even unable to recognize every obstacle, including small when using ParkSense®. Always check carefully obstacles.
Page 137: Parkview® Rear Back Up Camera - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 screen. After five seconds this note will disappear. The WARNING! (Continued) ParkView® camera is located on the rear of the vehicle could detect the ball mount and hitch ball assem- above the rear License plate. bly, depending on its size and shape, giving a false When the vehicle is shifted out of REVERSE, the rear indication that an obstacle is behind the vehicle.
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When enabled, fixed guide lines are overlaid on the Different colored zones indicate the distance to the rear of image to illustrate the width of the vehicle. the vehicle. NOTE: The ParkView® Rear Back Up Camera has pro- The following table shows the approximate distances for grammable modes of operation that may be selected each zone:...
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 WARNING! CAUTION! Drivers must be careful when backing up even when • To avoid vehicle damage, ParkView® should only using the ParkView® Rear Back Up Camera. Always be used as a parking aid. The ParkView® camera is check carefully behind your vehicle, and be sure to unable to view every obstacle or object in your check for pedestrians, animals, other vehicles, ob-...
Page 140: Garage Door Opener - If Equipped
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLink® replaces up to three remote controls (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting or home security systems. The HomeLink® unit operates off your vehicles battery.
Page 141: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 NOTE: Before You Begin Programming HomeLink® Be sure that your vehicle is parked outside of the garage • Erasing all channels should only be performed when before you begin programming. programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. Place the ignition in the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view.
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 5. At the garage door opener motor (in the garage), To program the remaining two HomeLink® buttons, locate the “LEARN” or “TRAINING” button. This can repeat each step for each remaining button. DO NOT usually be found where the hanging antenna wire is erase the channels.
Page 144: Programming A Non-Rolling Code
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Push and hold the programmed HomeLink® button Programming A Non-Rolling Code and observe the indicator light. For programming Garage Door Openers manufactured • If the indicator light stays on constantly, program- before 1995. ming is complete and the garage door/device should 1.
Page 145: Canadian/Gate Operator Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 3. Without releasing the button proceed with “Program- 1. Cycle the ignition to the ON/RUN position. ming A Non-Rolling Code” step 2 and follow all 2. Place the hand-held transmitter 1 to 3 inches (3 to remaining steps.
Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Push and hold the programmed HomeLink® button Reprogramming A Single HomeLink® Button and observe the indicator light. (Canadian/Gate Operator) • If the indicator light stays on constantly, program- To reprogram a channel that has been previously trained, ming is complete and the garage door/device should follow these steps: activate when the HomeLink®...
Page 147: Using Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 The HomeLink® Universal Transceiver is disabled when Using HomeLink® the Vehicle Security Alarm is active. To operate, switch the ignition to the ON/RUN position and the press and release the programmed HomeLink® Troubleshooting Tips button.
Page 148: General Information
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information WARNING! This device complies with FCC rules Part 15 and Industry • Vehicle exhaust contains carbon monoxide, a dan- Canada RSS-210. Operation is subject to the following gerous gas. Do not run your vehicle in the garage two conditions: while programming the transceiver.
Page 149: Power Sunroof - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 • The term IC before the certification/registration num- ber only signifies that Industry Canada technical speci- fications were met. POWER SUNROOF — IF EQUIPPED The sunroof has two glass panels (the front one is operational and the rear one fixed) and is equipped with an electrically operated sun blind.
Page 150: To Open
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Open WARNING! • Pull the power sunroof switch for approximately one • Never leave children alone in a vehicle, or with second and the sunroof will stop at the vented posi- access to an unlocked vehicle. Never leave the Key tion.
Page 151: Wind Buffeting
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Wind Buffeting Power Sun Blind Wind buffeting can be described as the perception of • Pull the power sun blind switch and the blind will pressure on the ears or a helicopter-type sound in the move towards the rear part of the car, until it is fully ears.
Page 152: Power Outlets
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER OUTLETS Passenger Compartment Power Socket The power outlet is located on the central tunnel, in front of the shift lever, between the two cup holders. It only operates with the ignition key at MAR/ON. On models with optional smoker’s kit, the cigar lighter takes the place of the power socket (see Cigar lighter paragraph).
Page 153: Cigar Lighter - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 CIGAR LIGHTER — IF EQUIPPED WARNING! This is located on the central tunnel, next to the parking When the cigar lighter is in use it becomes very hot. brake lever. To activate the cigar lighter, push and release the To avoid serious injury, handle the cigar lighter with knob.
Page 154: Cupholders
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For the rear seat passengers their is one cupholder CUPHOLDERS located in the center armrest. For the driver and front passenger, cupholders are lo- cated on the floor console between the front seats. Rear Cupholder Front Cupholders...
Page 155: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 STORAGE Glove Compartment Your vehicle is equipped with a upper and lower glove compartment which is located on the right side of the instrument panel. Push the latch button upward on the upper glove compartment door to open it. Pull outward on the lower glove compartment latch to open the lower glove compartment.
Page 156: Front Center Armrest Storage - If Equipped
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Center Armrest Storage — If Equipped The front center armrest contains a storage compartment. To open the storage compartment push in the upper release latch on the front of the armrest. Glove Compartment Storage Armrest Upper Release Latch Lift upward on the armrest to gain access to the storage area.
Page 157: Rear Cargo Storage Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 The front center armrest can also be lifted up and REAR CARGO STORAGE FEATURES adjusted in three positions, this is done by pulling up on The car features a load platform which can be adjusted to the armrest, push the latch down to adjust the armrest three different heights, permitting modular luggage com- down.
Page 158 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Position 3 (platform completely raised) in conjunction with the lowering of the rear seat and front passenger side seat backrests, permits long objects to be loaded. It is advisable to use this position only for the actual period in which the objects are transported, then return the platform to position 1 or 2.
Page 159 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 CAUTION! The dimension of the cargo floor permit a maximum capacity of a distributed weight of 154 lbs (70kg) (if positioned at threshold level) or 88 lbs (40 kg) (if positioned at raised level) do not add objects with a higher weight.
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Load Compartment Platform Housings 3. Then reposition the platform correctly in the housings 1 — Front Locations on the side panels and rear crossmember. 2 — Rear Locations NOTE: Movements of the load platform must take place in a central position relative to the luggage compartment.
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Moving the load platform To move the load platform from lower to upper position, proceed as follows: 1. Grip handle and raise the platform, holding it with one hand. Load Platform 1 — Handle 2 —...
Page 162: Securing Your Load
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Securing Your Load There are two tie downs inside the luggage compartment for attaching cables which can secure the load carried. A further two tie downs located on the rear crossmember. Raised Position 1 —...
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Two hooks are also available on the side panels to fix CAUTION! loads which are not excessively heavy (e.g. bags). To use the hooks, push the release button. The maximum load admitted per each bag hook is 22 lbs (10 kg).
Page 164: Storage Compartments
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Storage Compartments REAR WINDOW FEATURES There are two storage compartments located on the rear Rear Window Defroster side panels. The rear window defroster button is located with the climate controls on the instrument panel. Push this button to turn on the rear window defroster.
Page 165: Roof Luggage Rack-If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 ROOF LUGGAGE RACK-IF EQUIPPED CAUTION! The crossbars and siderails are designed to carry the Failure to follow these cautions can cause damage to weight on vehicles equipped with a luggage rack. The the heating elements: load must not exceed 110 lbs (50 kg), and should be •...
Page 166 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in per- sonal injury or property damage. Follow the roof rack cautions when carrying cargo on your roof rack.
Page 167: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT PANEL FEATURES ..167 ▫ Trip Computer ..... . .184 INSTRUMENT CLUSTER .
Page 168 166 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Player Operation ..... .193 ▫ Get Started ......214 CD/DVD DISC MAINTENANCE .
Page 169: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 167 INSTRUMENT PANEL FEATURES 1 — Side Vent 7 — Fixed Upper Air Vent 13 — Climate Controls 2 — Steering Wheel Audio Control — 8 — Passenger Advanced Front Air Bag 14 — USB Port/SD Card/AUX Socket Located On Back Side Of Steering Wheel 3 —...
Page 170: Instrument Cluster
168 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
Page 171: Instrument Cluster Descriptions
UNDERSTANDING YOUR INSTRUMENT PANEL 169 4. Electronic Stability Control (ESC) Activation / Mal- INSTRUMENT CLUSTER DESCRIPTIONS function Indicator Light 1. Speedometer The ESC Activation/Malfunction Indicator The Speedometer shows the vehicle speed in miles per Light in the instrument cluster will come on for hour (mph) and/or kilometers per hour (km/h).
Page 172 170 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If brake failure is indicated, immediate repair is neces- sary. • The ESC Off Indicator Light and the ESC Activation/ Malfunction Indicator Light come on momentarily WARNING! each time the ignition switch is turned to ON/RUN. Driving a vehicle with the red brake light on is •...
Page 173 UNDERSTANDING YOUR INSTRUMENT PANEL 171 off unless the parking brake is applied or a brake fault is 8. Fuel Gauge detected. If the light does not illuminate, have the light When the ignition switch is in the ON/RUN position, the inspected by an authorized dealer.
Page 174 172 UNDERSTANDING YOUR INSTRUMENT PANEL The gauge pointer will likely indicate a higher tempera- WARNING! ture when driving in hot weather, or up mountain grades. It should not be allowed to exceed the upper A hot engine cooling system is dangerous. You or limits of the normal operating range.
Page 175 UNDERSTANDING YOUR INSTRUMENT PANEL 173 If the light turns on while driving, safely pull over and Center (EVIC) will show how long the function remains stop the vehicle. If the A/C system is on, turn it off. Also, active. For further information, refer to “Follow Me Home” shift the transmission into NEUTRAL and idle the ve- in “Understanding The Features of Your Vehicle”.
Page 176: Understanding Your Instrument Panel 165
174 UNDERSTANDING YOUR INSTRUMENT PANEL 16. Air Bag Warning Light 18. Oil Pressure Warning Light This light will turn on for four seconds as a This light indicates low engine oil pressure. The bulb check when the ignition switch is first light should turn on momentarily when the engine is turned to ON/RUN.
Page 177 UNDERSTANDING YOUR INSTRUMENT PANEL 175 Certain conditions, such as poor fuel quality, etc., may WARNING! illuminate the MIL after engine start. The vehicle should be serviced if the light stays on through several of your A malfunctioning catalytic converter, as referenced typical driving cycles.
Page 178 176 UNDERSTANDING YOUR INSTRUMENT PANEL As an added safety feature, your vehicle has been Your vehicle has also been equipped with a TPMS equipped with a Tire Pressure Monitoring System malfunction indicator to indicate when the system is not (TPMS) that illuminates a low tire pressure telltale when operating properly.
Page 179 UNDERSTANDING YOUR INSTRUMENT PANEL 177 21. Glow Plug Light — If Equipped CAUTION! This vehicle will inhibit engine cranking when the The TPMS has been optimized for the original ambient temperature is less than –22° F (–30° C) equipment tires and wheels. TPMS pressures and and the oil temperature sensor reading indicates an warning have been established for the tire size engine block heater has not been used.
Page 180 178 UNDERSTANDING YOUR INSTRUMENT PANEL 22. Odometer / Trip Odometer / Electronic Vehicle Infor- NOTE: If the vehicle is equipped with the Electronic mation Center (EVIC) Display Area Vehicle Information Center (EVIC) in the instrument cluster, all warnings including “door” and “gate” and This display indicates the total distance the vehicle has “Change Engine Oil”...
Page 181 UNDERSTANDING YOUR INSTRUMENT PANEL 179 shift lever is placed in the NEUTRAL position. The light 25. Anti-Lock Brake (ABS) Light should turn off. If the light remains lit with the engine This light monitors the Anti-Lock Brake System running, your vehicle will usually be drivable; however, (ABS).
Page 182: Electronic Vehicle Information
180 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION EVIC Screen CENTER (EVIC) The EVIC will display the following: The Electronic Vehicle Information Center (EVIC) fea- • Time tures a driver-interactive display that is located in the instrument cluster. • Date or trip distance display in miles or kilometers The EVIC consists of the following: •...
Page 183: Evic Control Buttons
UNDERSTANDING YOUR INSTRUMENT PANEL 181 NOTE: UP and DOWN buttons activate differ- EVIC Control Buttons ent functions according to the following situations: The EVIC control buttons are located on the instrument • To scroll the menu options upwards or downwards. panel below the radio.
Page 184: Electronic Vehicle Information Center (Evic) Setup Menu
182 UNDERSTANDING YOUR INSTRUMENT PANEL • Selecting An Option Of The Main Menu Without Electronic Vehicle Information Center (EVIC) Submenu Setup Menu The menu comprises a series of functions arranged in a Briefly push and release the MENU button to select the cycle.
Page 185: Change Engine Oil Indicator System
UNDERSTANDING YOUR INSTRUMENT PANEL 183 Briefly push and release the MENU button to select the after a single chime has sounded to indicate the next displayed submenu option and to open the relevant scheduled oil change interval. The engine oil change setup menu.
Page 186: Trip Computer
184 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. Trip Computer The Trip Computer is located in the instrument cluster. It features a driver-interactive display (displays informa- tion such as;...
Page 187 UNDERSTANDING YOUR INSTRUMENT PANEL 185 New Trip Start Of Trip Procedure To reset: With the ignition on, push and hold the TRIP button for over one second to reset. • Push and hold the TRIP button to reset the system manually.
Page 188: Trip Functions
186 UNDERSTANDING YOUR INSTRUMENT PANEL • Average speed B Trip Functions Both trip functions are resettable (reset — start of new • Travel time B (driving time). trip). NOTE: “Trip B” functions may be excluded (see “Trip B “Trip A” can be used to display the figures relating to: Data”).
Page 189: Personal Settings (Customer-Programmable Features)
This value shows the distance covered since the last reset. Indication) Average Economy This function will only be displayed after a FIAT Group This value shows the approximate average consumption Automobiles Dealership has deactivated the BeltAlert® since the last reset.
Page 190 188 UNDERSTANDING YOUR INSTRUMENT PANEL • Push and release the SET ESC button briefly to return 3. Briefly push and release the MENU button to go back to the submenu screen or hold the button down to to the menu screen, or push and hold the MENU return to the main menu screen without saving.
Page 191 UNDERSTANDING YOUR INSTRUMENT PANEL 189 3. When the function is activated (On), briefly push and To cancel the setting, proceed as follows: release the MENU button to display the presently set 1. Briefly push and release the MENU button. “On” will activation speed.
Page 192 190 UNDERSTANDING YOUR INSTRUMENT PANEL To adjust the brightness, proceed as follows: Proceed as follows to switch this function on or off: 1. Push and release the UP or DOWN button to 1. Briefly push and release the MENU button. “On” or set the required brightness level.
Page 193: Uconnect® Radios
UNDERSTANDING YOUR INSTRUMENT PANEL 191 Exit Menu This function closes the initial menu screen. Briefly push and release the MENU button to go back to the main screen. Push and release the button to return to the first menu option (Speed Beep). Push and release the button to return to the last menu option (Daylights).
Page 194: Steering Wheel Audio Controls
192 UNDERSTANDING YOUR INSTRUMENT PANEL The right-hand control is a rocker-type switch with a STEERING WHEEL AUDIO CONTROLS pushbutton in the center and controls the volume and The remote sound system controls are located at the rear mode of the sound system. Pushing the top of the rocker of the steering wheel.
Page 195: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 193 Radio Operation CD/DVD DISC MAINTENANCE Pushing the top of the switch will “Seek” up for the next To keep a CD/DVD in good condition, take the following listenable station and pushing the bottom of the switch precautions: will “Seek”...
Page 196: Radio Operation And Mobile Phones
194 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particular CLIMATE CONTROLS disc, it may be damaged (i.e., scratched, reflective coating Manual Climate Control System removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc Controls before considering disc player service.
Page 197 UNDERSTANDING YOUR INSTRUMENT PANEL 195 The Manual Climate controls consist of a series of rotary NOTE: dials, an inner push knob and two push buttons. • Continuous use of the Recirculation mode may make 1. Temperature Control the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended.
Page 198 196 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Blower Control 5. Rear Defrost Control Rotate this control to regulate the amount of air forced Push and release the Rear Defrost Control button to turn through the ventilation system in any mode. The blower ON the rear window defroster and the heated outside speed increases as you move the control to the right from mirrors (if equipped).
Page 199 UNDERSTANDING YOUR INSTRUMENT PANEL 197 • Bi-Level NOTE: The air conditioning compressor operates in Mix Air is directed through the panel and floor or Defrost, even if the Air Conditioning (A/C) button is outlets. not pushed. This dehumidifies the air to help dry the windshield.
Page 200 198 UNDERSTANDING YOUR INSTRUMENT PANEL Air Recirculation Air Distribution Selection Push and release the Air Recirculation button, so that the Rotate the Mode Control knob to manually select one of LED on the button switch is on, to enter recirculation the five possible air distribution settings in the passenger mode.
Page 201 It activates in cold weather conditions, if the following least once a month for about 10 minutes. conditions are verified: Have the system inspected at a Fiat dealership before the • outside temperature low; summer. • engine coolant temperature low;...
Page 202: Automatic Dual Zone Climate Control System (If Equipped)
200 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Driver Temperature Control Automatic Dual Zone Climate Control System (If Equipped) Provides the driver with independent temperature con- Controls trol. Rotate adjustment knob to set desired temperature. NOTE: In Sync mode, this button will also automatically adjust the passenger temperature setting at the same time.
Page 203 UNDERSTANDING YOUR INSTRUMENT PANEL 201 3. Rear Defrost Control 6. Blower Control Push and release the Rear Defrost Control button to turn Blower control is used to regulate the amount of air ON the rear window defroster and the heated outside forced through the climate system.
Page 204 202 UNDERSTANDING YOUR INSTRUMENT PANEL 9. Front Defrost Control 11. SYNC Button Push and release the Front Defrost Control button to Push the Sync button to toggle the Sync feature ON/OFF. change the current airflow setting to Defrost mode. The The Sync indicator is illuminated when this feature is indicator illuminates when this feature is ON.
Page 205 UNDERSTANDING YOUR INSTRUMENT PANEL 203 The system maintains comfort inside the passenger com- • air recirculation partment and compensates for possible variations in All these functions can be adjusted manually by operat- external climate conditions. ing the system, selecting one or more functions and The climate control system can recognize extremely cold modifying their parameters.
Page 206 204 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the following to be set or adjusted NOTE: The climate control system detects the passenger manually: compartment temperature using a mean radiant tem- perature sensor located in the interior rear view mirror •...
Page 207 UNDERSTANDING YOUR INSTRUMENT PANEL 205 During automatic operation, you can change the set Adjusting The Air Temperature temperatures, air distribution and fan speed at any time Rotate the Driver Temperature Control, or the Passenger by using the relevant buttons or knobs: the system will Temperature Control, dial clockwise or anti clockwise, to automatically change the settings to adjust to the new adjust the air temperature in the front left (Driver Tem-...
Page 208 206 UNDERSTANDING YOUR INSTRUMENT PANEL To deactivate these functions, turn the temperature knob • Down Arrow – Air flow to the front and rear footwell to the desired temperature. diffusers. This air distribution setting heats the passen- ger compartment most quickly, giving a prompt sen- Air Distribution Selection sation of warmth.
Page 209 UNDERSTANDING YOUR INSTRUMENT PANEL 207 • Up/Right/Down Arrows – Air flow distribution to all To restore automatic control of the air distribution after a diffusers on the car. manual selection, push the AUTO button. NOTE: Air always flows from the side dashboard diffus- AUTO Button ers: it is, however, possible to interrupt the air flow by When the AUTO button is pushed (LED on button lit) the...
Page 210 208 UNDERSTANDING YOUR INSTRUMENT PANEL If the AUTO button is pushed when the AUTO LED is on, SYNC Button the system switches to completely manual mode; it Push the SYNC button (LED on button lit) to align the displays the current flow and distribution status, which passenger side air temperature with that of the driver will no longer be managed automatically.
Page 211 UNDERSTANDING YOUR INSTRUMENT PANEL 209 Air Recirculation NOTE: The Air Recirculation is managed according to the fol- • The engagement of the recirculation system makes it lowing operating logics: possible to reach the required heating/cooling condi- tions faster. It is, however, inadvisable to use it on •...
Page 212 210 UNDERSTANDING YOUR INSTRUMENT PANEL Climate Control System Compressor Rapid Window Demisting (MAX-DEF function) Push the A/C Control button to activate/deactivate the Push the MAX-DEF button to activate (LED on button compressor (activation is indicated by the LED on the on) the windshield and side window demisting function.
Page 213 UNDERSTANDING YOUR INSTRUMENT PANEL 211 NOTE: The Front Defrost Control (MAX-DEF) function Rear Window Defrosting remains on for about three minutes from when the engine Push the Rear Defrost button to activate heated rear coolant reaches the appropriate temperature. window defrosting. When the function is activated, the LED on the AUTO The effective activation of the function is indicated by the button switches off.
Page 214 212 UNDERSTANDING YOUR INSTRUMENT PANEL Switching Off The Climate Control System Additional Heater (If Equipped) Push the On/Off button. This allows the passenger compartment to be heated more quickly in cold weather conditions. With climate control system off: The heater switches off automatically when the required •...
Page 215: Uconnect® Voice Recognition Quick Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 213 Key Features: Uconnect® VOICE RECOGNITION QUICK TIPS • 5.0-inch Color Touchscreen Display with AM/FM/ Introducing Uconnect® USB/Bluetooth® Start using Uconnect® Voice Recognition with these • Bluetooth with integrated voice control helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect®...
Page 216: Get Started
214 UNDERSTANDING YOUR INSTRUMENT PANEL Key Features: 3. Speak clearly at a normal pace and volume while facing straight ahead. The microphone is positioned • 6.5-inch Color Touchscreen Display with AM/FM/ on the rearview mirror and aimed at the driver. USB/SD Card/Bluetooth®...
Page 217: Basic Voice Commands
UNDERSTANDING YOUR INSTRUMENT PANEL 215 Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect® system. Push the VR button . After the beep, say • Cancel to stop a current voice session. •...
Page 218 216 UNDERSTANDING YOUR INSTRUMENT PANEL Notice the visual cues that inform you of your voice recognition system’s status. Cues appear on the touch- screen. Uconnect® 6.5A/6.5AN Uconnect® 5.0...
Page 219: Radio
UNDERSTANDING YOUR INSTRUMENT PANEL 217 Radio Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio® stations you would like to hear. (Sub- scription or included SiriusXM Satellite Radio® trial required.) Push the VR button . After the beep, say •...
Page 220: Media
218 UNDERSTANDING YOUR INSTRUMENT PANEL Media Uconnect® offers connections via USB Port, Bluetooth® and Auxiliary Ports (If Equipped). Voice operation is only available for connected USB and iPod® devices. (Remote CD player optional and not available on all vehicles.) Push the VR button .
Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 219 TIP: Press the Browse button on the touchscreen to see all of the music on your iPod® or USB device. Your Voice Command must match exactly how the artist, album, song and genre information is displayed. Uconnect®...
Page 222: Phone
220 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: When providing a Voice Command, push the Phone Phone button and say “Call,” then pronounce the name Making and answering hands-free phone calls is easy exactly as it appears in your phone book. When a with Uconnect®.
Page 223: Navigation (6.5A/6.5An)
UNDERSTANDING YOUR INSTRUMENT PANEL 221 Navigation (6.5A/6.5AN) The Uconnect® navigation feature helps you save time and become more productive when you know exactly how to get to where you want to go. 1. To enter a destination, push the VR button .
Page 224: Voice Text Reply
222 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: To start a POI search, push the VR button Voice Text Reply After the beep, say: “ Find nearest coffee shop.” Uconnect® will announce incoming text messages. Push the Phone button and say “Listen.” (Must have compatible mobile phone paired to Uconnect®...
Page 225: Additional Information
UNDERSTANDING YOUR INSTRUMENT PANEL 223 Additional Information PRE-DEFINED VOICE TEXT REPLY RESPONSES © 2015 FCA US LLC. All rights reserved. Mopar and Yes. Stuck in Traffic. See you later. Uconnect are registered trademarks and Mopar Owner Start without I’ll be Late. Connect is a trademark of FCA US LLC.
Page 227 STARTING AND OPERATING CONTENTS STARTING PROCEDURES ....229 ▫ Downshifting ......234 ▫...
Page 228 226 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES ..255 ▫ Hill Start Assist (HSA) ....263 ▫ Acceleration ......255 ▫...
Page 229 STARTING AND OPERATING 227 ▫ Tire Inflation Pressures ....283 TIRE PRESSURE MONITORING SYSTEM (TPMS) ..... . .296 ▫...
Page 230 228 STARTING AND OPERATING ADDING FUEL ......306 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) ....309 TRAILER TOWING .
Page 231: Starting Procedures
STARTING AND OPERATING 229 STARTING PROCEDURES Manual Transmission — If Equipped Before starting your vehicle, adjust your seat, adjust both Apply the parking brake, place the shift lever in NEU- inside and outside mirrors, and fasten your seat belts. TRAL, and press the clutch pedal before starting the vehicle.
Page 232: Normal Starting
230 STARTING AND OPERATING The message “plug in engine heater” will be displayed in Normal Starting the instrument cluster when the ambient temperature is NOTE: Normal starting of either a cold or a warm below 5° F (–15° C) at the time the engine is shut off as a engine is obtained without pumping or pressing the reminder to avoid possible crank delays at the next cold accelerator pedal.
Page 233: If Engine Fails To Start
STARTING AND OPERATING 231 3. If the engine fails to start within ten seconds, cycle the If Engine Fails To Start ignition to the STOP (OFF/LOCK) position, wait five seconds to allow the starter to cool, then repeat the WARNING! Extended Park Starting procedure.
Page 234: After Starting
232 STARTING AND OPERATING After Starting MANUAL TRANSMISSION — IF EQUIPPED The idle speed is controlled automatically and it will WARNING! decrease as the engine warms up. You or others could be injured if you leave the Turbo Charger “Cool Down” vehicle unattended without having the parking This vehicle is equipped with an after-run pump to cool brake fully applied.
Page 235 STARTING AND OPERATING 233 For most city driving you will find it easier to use only the lower gears. For steady highway driving with light accelerations, sixth gear is recommended. Never drive with your foot resting on the clutch pedal, or try to hold the vehicle on a hill with the clutch pedal partially engaged.
Page 236: Downshifting
234 STARTING AND OPERATING Downshifting AUTOMATIC TRANSMISSION — IF EQUIPPED Proper downshifting will improve fuel economy and CAUTION! prolong engine life. Damage to the transmission may occur if the follow- CAUTION! ing precautions are not observed: • Shift into or out of PARK or REVERSE only after If you skip a gear while downshifting or downshift the vehicle has come to a complete stop.
Page 237 STARTING AND OPERATING 235 WARNING! WARNING! (Continued) locked in PARK, securing the vehicle against un- • It is dangerous to shift out of PARK or NEUTRAL wanted movement. if the engine speed is higher than idle speed. If • When leaving the vehicle, always remove the igni- your foot is not firmly pressing the brake pedal, the tion key from the vehicle and lock the vehicle.
Page 238: Key Ignition Park Interlock
236 STARTING AND OPERATING Key Ignition Park Interlock Six-Speed Euro Twin Clutch Transmission — If Equipped This vehicle is equipped with a Key Ignition Park Inter- lock which requires the transmission to be in PARK The transmission gear position display (located in the before the ignition switch can be turned to the LOCK/ instrument cluster) indicates the transmission gear range.
Page 239 STARTING AND OPERATING 237 Only shift from DRIVE to PARK or REVERSE when the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when shifting between these gears. The transmission shift lever has PARK, REVERSE, NEU- TRAL, DRIVE, and AutoStick®...
Page 240 238 STARTING AND OPERATING NOTE: If the shift lever cannot be moved to the PARK, PARK (P) REVERSE, or NEUTRAL position (when pushed for- This range supplements the parking brake by locking the ward) it is probably in the AutoStick (+/-) position transmission.
Page 241 STARTING AND OPERATING 239 WARNING! WARNING! (Continued) • Unintended movement of a vehicle could injure those • Never use the PARK position as a substitute for the in or near the vehicle. As with all vehicles, you should parking brake. Always apply the parking brake never exit a vehicle while the engine is running.
Page 242 240 STARTING AND OPERATING The following indicators should be used to ensure that WARNING! (Continued) you have engaged the transmission into the PARK posi- • Do not leave the ignition key in or near the vehicle tion: (or in a location accessible to children). A child •...
Page 243 STARTING AND OPERATING 241 NEUTRAL (N) CAUTION! Use this range when the vehicle is standing for prolonged Towing the vehicle, coasting, or driving for any other periods with the engine running. The engine may be reason with the transmission in NEUTRAL can cause started in this range.
Page 244 242 STARTING AND OPERATING To maximize fuel economy, the Euro Twin Clutch Six • When stopped on an incline, always use the brakes to Speed Transmission uses a geartrain arrangement similar hold the vehicle in place. On steep inclines, Hill Start to a manual transmission.
Page 245 STARTING AND OPERATING 243 • During extremely cold temperatures, the transmission Instrument Cluster Messages will not operate if the oil temperature is -22° F (-30° C) Messages will be displayed in the instrument cluster to or below. Allow the engine to idle briefly with the alert the driver when certain unusual conditions occur.
Page 246 244 STARTING AND OPERATING MESSAGE DESCRIPTION AUTOMATIC UNAVAILABLE The transmission is unable to shift itself automatically, due to a fault condition. Use the AutoStick mode to shift the transmission manually. See your authorized dealer for diagnosis and service. REDUCE GEAR CHANGES The transmission pump is overheating.
Page 247 STARTING AND OPERATING 245 MESSAGE DESCRIPTION SERVICE TRANSMISSION A transmission fault has been detected. See your authorized dealer for diagnosis and service. SERVICE A shift lever fault has been detected. See your authorized dealer for diag- nosis and service. SET PARK BRAKE The sensor that confirms PARK engagement is not functioning properly.
Page 248: Six-Speed Automatic Transmission (Aisin F21-250 Hd) - If Equipped
246 STARTING AND OPERATING 3. Turn the ignition switch to the OFF position. Six-Speed Automatic Transmission (Aisin F21-250 HD) — If Equipped 4. Wait approximately 10 seconds. The transmission gear position display (located in the 5. Restart the engine. instrument cluster) indicates the transmission gear range. You must press the brake pedal and the lock button on 6.
Page 249 STARTING AND OPERATING 247 shifts can be made using the AutoStick shift control (refer to “AutoStick” in this section for further information). Moving the shift lever into the AutoStick (+/-) position (beside the DRIVE position) activates AutoStick mode, providing manual shift control and displaying the cur- rent gear in the instrument cluster (as 1, 2, 3, etc).
Page 250 248 STARTING AND OPERATING Gear Ranges When parking on a hill, apply the parking brake before shifting the transmission to PARK, otherwise the load on DO NOT race the engine when shifting from PARK or the transmission locking mechanism may make it difficult NEUTRAL into another gear range.
Page 251 STARTING AND OPERATING 249 WARNING! (Continued) WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL locked in PARK, securing the vehicle against un- if the engine speed is higher than idle speed. If wanted movement. your foot is not firmly pressing the brake pedal, the •...
Page 252 250 STARTING AND OPERATING • Look at the transmission gear position display and CAUTION! verify that it indicates the PARK position. • Before moving the shift lever out of PARK, you • With brake pedal released, verify that the shift lever must turn the ignition switch from the LOCK/OFF will not move out of PARK.
Page 253 STARTING AND OPERATING 251 DRIVE (D) WARNING! This range should be used for most city and highway Do not coast in NEUTRAL and never turn off the driving. It provides the smoothest upshifts and down- ignition to coast down a hill. These are unsafe shifts, and the best fuel economy.
Page 254 252 STARTING AND OPERATING If the transmission temperature exceeds normal operating Limp Home Mode allows the vehicle to be driven to an limits, the transmission controller will expand the range of authorized dealer for service without damaging the trans- torque converter clutch engagement. This is done to pre- mission.
Page 255: Autostick
STARTING AND OPERATING 253 NOTE: Even if the transmission can be reset, we recom- Operation mend that you visit your authorized dealer at your When the shift lever is in the AutoStick position (beside earliest possible convenience. Your authorized dealer has the Drive position), it can be moved forward and rear- diagnostic equipment to determine if the problem could ward.
Page 256 254 STARTING AND OPERATING • The transmission will automatically downshift to first • Transmission shifting will be more noticeable when gear when coming to a stop. After a stop, the driver AutoStick is engaged. should manually upshift (+) the transmission as the •...
Page 257: Driving On Slippery Surfaces
STARTING AND OPERATING 255 DRIVING ON SLIPPERY SURFACES Traction When driving on wet or slushy roads, it is possible for a Acceleration wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slip- surface.
Page 258: Driving Through Water
256 STARTING AND OPERATING DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/ Although your vehicle is capable of driving through centimeters deep will require extra caution to ensure shallow standing water, consider the following Cautions safety and prevent damage to your vehicle.
Page 259: Electric Power Steering
STARTING AND OPERATING 257 CAUTION! CAUTION! (Continued) operate the vehicle if any fluid appears contami- • Always check the depth of the standing water nated, as this may result in further damage. Such before driving through it. Never drive through damage is not covered by the New Vehicle Limited standing water that is deeper than the bottom of Warranty.
Page 260: Parking Brake
258 STARTING AND OPERATING PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave manual transmission in REVERSE or first gear. The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible.
Page 261 STARTING AND OPERATING 259 When parking on a hill, it is important to turn the front WARNING! (Continued) wheels toward the curb on a downhill grade and away • Be sure the parking brake is fully disengaged from the curb on an uphill grade. The parking brake should before driving;...
Page 262: Brake System
260 STARTING AND OPERATING BRAKE SYSTEM ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with dual hydraulic brake Your vehicle is equipped with a advanced electronic systems. If either of the two hydraulic systems loses brake control system that includes the Anti-Lock Brake normal capability, the remaining system will still func- System (ABS), Brake Assist System (BAS), Traction Con- tion.
Page 263 STARTING AND OPERATING 261 The system’s pump motor runs during an ABS stop to WARNING! (Continued) provide regulated hydraulic pressure. The pump motor • The Anti-Lock Brake System (ABS) cannot prevent makes a low humming noise during operation, which is the natural laws of physics from acting on the normal.
Page 264: Brake Assist System (Bas)
262 STARTING AND OPERATING Engagement of the ABS may be accompanied by a WARNING! pulsing sensation. You may also hear a clicking noise. These occurrences are normal and indicate that the • The Brake Assist System (BAS) cannot prevent the system is functioning properly.
Page 265: Traction Control System (Tcs)
STARTING AND OPERATING 263 Traction Control System (TCS) Hill Start Assist (HSA) The Traction Control System (TCS) monitors the amount The HSA system is designed to assist the driver when of wheel spin of each of the driven wheels. If wheel spin starting a vehicle from a stop on a hill.
Page 266: Dynamic Steering Torque (Dst)
264 STARTING AND OPERATING HSA Activation Criteria Disabling/Enabling HSA The following criteria must be met in order for HSA to If you wish to turn the HSA system on or off, it can be done activate: using the Customer Programmable Features in the Elec- tronic Vehicle Information Center (EVIC).
Page 267: Electronic Stability Control (Esc)
STARTING AND OPERATING 265 The coordinated action of brakes and steering increases • Oversteer - when the vehicle is turning more than the safety and car control feeling. appropriate for the steering wheel position. NOTE: The DST is a driving aid system and does not •...
Page 268: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
266 STARTING AND OPERATING The ESC Activation/Malfunction Indicator Light (located WARNING! (Continued) in the instrument cluster) starts to flash as soon as the never be exploited in a reckless or dangerous manner tires lose traction and the ESC system becomes active. which could jeopardize the user’s safety or the safety The ESC Activation/Malfunction Indicator Light also of others.
Page 269 STARTING AND OPERATING 267 The ESC OFF Indicator Light indicates the “ESC Activation/Malfunction Indicator Light” will illu- Electronic Stability Control (ESC) is partially minate. To turn the ESC on again, momentarily push the off. “ESC OFF” button and the “ESC Activation/Malfunction Indicator Light”...
Page 270: Electronic Roll Mitigation (Erm)
268 STARTING AND OPERATING NOTE: To improve the vehicle’s traction when driving Electronic Roll Mitigation (ERM) with snow chains, or when starting off in deep snow, This system anticipates the potential for wheel lift by sand, or gravel, it may be desirable to switch to the monitoring the driver’s steering wheel input and the “Partial Off”...
Page 271: Tire Safety Information
STARTING AND OPERATING 269 TIRE SAFETY INFORMATION WARNING! Tire Markings Many factors, such as vehicle loading, road condi- tions, and driving conditions, influence the chance that wheel lift or rollover may occur. ERM cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles.
Page 272 270 STARTING AND OPERATING NOTE: • LT (Light Truck) — Metric tire sizing is based on U.S. design standards. The size designation for LT-Metric • P (Passenger) — Metric tire sizing is based on U.S. tires is the same as for P-Metric tires except for the design standards.
Page 273 STARTING AND OPERATING 271 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 274 272 STARTING AND OPERATING EXAMPLE: 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions –...
Page 275: Tire Identification Number (Tin)
STARTING AND OPERATING 273 EXAMPLE: Maximum Load – Maximum load indicates the maximum load this tire is designed to carry Maximum Pressure – Maximum pressure indicates the maximum permissible cold tire inflation pressure for this tire Look for the TIN on the outboard side of black sidewall Tire Identification Number (TIN) tires as mounted on the vehicle.
Page 276 274 STARTING AND OPERATING EXAMPLE: DOT MA L9 ABCD 0301 03 = Number representing the week in which the tire was manufactured (two digits) – 03 means the 3rd week 01 = Number representing the year in which the tire was manufactured (two digits) –...
Page 277: Tire Terminology And Definitions
STARTING AND OPERATING 275 Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 278: Tire Loading And Tire Pressure
276 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (B-Pillar) Example Tire Placard Location (Door)
Page 279 STARTING AND OPERATING 277 Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3. Tire size designed for your vehicle. 4.
Page 280 278 STARTING AND OPERATING NOTE: Under a maximum loaded vehicle condition, Steps For Determining Correct Load Limit gross axle weight ratings (GAWRs) for the front and rear 1. Locate the statement “The combined weight of occu- axles must not be exceeded. For further information on pants and cargo should never exceed XXX lbs or GAWRs, vehicle loading, and trailer towing, refer to XXX kg”...
Page 281 STARTING AND OPERATING 279 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
Page 282 280 STARTING AND OPERATING...
Page 283: Tires - General Information
STARTING AND OPERATING 281 Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase • Improperly inflated tires are dangerous and can your stopping distance. Use tires of the recommended cause collisions. load capacity for your vehicle.
Page 284 282 STARTING AND OPERATING Fuel Economy WARNING! (Continued) Underinflated tires will increase tire rolling resistance • Unequal tire pressures from one side of the vehicle resulting in higher fuel consumption. to the other can cause the vehicle to drift to the right or left.
Page 285: Tire Inflation Pressures
STARTING AND OPERATING 283 Inflation pressures specified on the placard are always Tire Inflation Pressures “cold tire inflation pressure”. Cold tire inflation pressure The proper cold tire inflation pressure is listed on the is defined as the tire pressure after the vehicle has not driver’s side B-Pillar or rear edge of the driver’s side door.
Page 286: Tire Pressures For High Speed Operation
284 STARTING AND OPERATING inflation pressure should be increased by 3 psi (21 kPa), WARNING! which equals 1 psi (7 kPa) for every 12°F (7°C) for this outside temperature condition. High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) tires could cause them to fail.
Page 287: Tire Types
STARTING AND OPERATING 285 Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (Spring, • The tire has not been driven on when flat. Summer, Fall and Winter).
Page 288 286 STARTING AND OPERATING Summer tires do not contain the all season designation or If you need snow tires, select tires mountain/snowflake symbol on the tire sidewall. Use equivalent in size and type to the origi- Summer tires only in sets of four; failure to do so may nal equipment tires.
Page 289: Run Flat Tires - If Equipped
STARTING AND OPERATING 287 Run Flat Tires — If Equipped Spare Tires — If Equipped Run Flat tires allow you the capability to drive 50 miles NOTE: For vehicles equipped with Tire Service Kit (80 km) at 50 mph (80 km/h) after a rapid loss of inflation instead of a spare tire, please refer to “Tire Service Kit”...
Page 290 288 STARTING AND OPERATING rotation for your vehicle. If your vehicle has this option, Do not install a wheel cover or attempt to mount a refer to an authorized tire dealer for the recommended conventional tire on the compact spare wheel, since the tire rotation pattern.
Page 291 STARTING AND OPERATING 289 Full Size Spare — If Equipped tire affects vehicle handling. Since it is not the same as your original equipment tire, replace (or repair) the The full size spare is for temporary emergency use only. original equipment tire and reinstall on the vehicle at the This tire may look like the originally equipped tire on the first opportunity.
Page 292: Tire Spinning
290 STARTING AND OPERATING Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, do not Tread wear indicators are in the original equipment tires spin your vehicle’s wheels above 30 mph (48 km/h) or to help you in determining when your tires should be for longer than 30 seconds continuously without stop- replaced.
Page 293: Life Of Tire
STARTING AND OPERATING 291 These indicators are molded into the bottom of the tread • Performance tires, tires with a speed rating of V or grooves. They will appear as bands when the tread depth higher, and Summer tires typically have a reduced becomes a 1/16 of an inch (2 mm).
Page 294: Replacement Tires
292 STARTING AND OPERATING It is recommended to replace the two front tires or two Replacement Tires rear tires as a pair. Replacing just one tire can seriously The tires on your new vehicle provide a balance of many affect your vehicle’s handling. If you ever replace a characteristics.
Page 295 STARTING AND OPERATING 293 WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
Page 296: Tire Chains (Traction Devices)
294 STARTING AND OPERATING TIRE CHAINS (TRACTION DEVICES) CAUTION! Use of traction devices require sufficient tire-to-body To avoid damage to your vehicle or tires, observe the clearance. Follow these recommendations to guard following precautions: against damage. • Because of restricted traction device clearance be- •...
Page 297: Tire Rotation Recommendations
STARTING AND OPERATING 295 These effects can be reduced by timely rotation of tires. CAUTION! (Continued) The benefits of rotation are especially worthwhile with • Observe the traction device manufacturer’s instruc- aggressive tread designs such as those on all season type tions on the method of installation, operating tires.
Page 298: Starting And Operating
296 STARTING AND OPERATING The suggested rotation method is the “rearward cross” TIRE PRESSURE MONITORING SYSTEM (TPMS) shown in the following diagram. This rotation pattern The Tire Pressure Monitor System (TPMS) will warn the does not apply to some directional tires that must not be driver of a low tire pressure based on the vehicle recom- reversed.
Page 299 STARTING AND OPERATING 297 The TPMS will warn the driver of a low tire pressure if For example, your vehicle may have a recommended the tire pressure falls below the low pressure warning cold (parked for more than three hours) tire pressure of limit for any reason, including low temperature effects, or 30 psi (207 kPa).
Page 300 298 STARTING AND OPERATING CAUTION! CAUTION! (Continued) • After inspecting or adjusting the tire pressure, • The TPMS has been optimized for the original always reinstall the valve stem cap. This will equipment tires and wheels. TPMS pressures and prevent moisture and dirt from entering the valve warnings have been established for the tire size stem, which could damage the Tire Pressure Moni- equipped on your vehicle.
Page 301: Base System
STARTING AND OPERATING 299 • Driving on a significantly under-inflated tire causes Base System the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire This is the TPMS warning indicator located in the tread life, and may affect the vehicle’s handling and instrument cluster.
Page 302 300 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings the “Service Tire Pressure Monitoring System” text mes- sage will display. If the ignition key is cycled, this The Tire Pressure Monitoring Telltale Light will illumi- sequence will repeat providing the system fault still nate in the instrument cluster, an audible chime will be exists.
Page 303 STARTING AND OPERATING 301 NOTE: Your vehicle may be equipped with a compact • This occurs for each subsequent ignition key cycle, a spare wheel and tire assembly. chime will sound and the Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds and •...
Page 304: General Information
302 STARTING AND OPERATING General Information FUEL REQUIREMENTS — 1.4L Turbo This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the This engine is designed to meet all emis- following conditions: sion regulations and provide satisfactory fuel economy and performance when us-...
Page 305: Reformulated Gasoline
STARTING AND OPERATING 303 are required in some areas of the country during the Reformulated Gasoline winter months to reduce carbon monoxide emissions. Many areas of the country require the use of cleaner Fuels blended with these oxygenates may be used in burning gasoline referred to as “Reformulated Gasoline”.
Page 306: Mmt In Gasoline
304 STARTING AND OPERATING MMT In Gasoline Materials Added To Fuel Methylcyclopentadienyl Manganese Tricarbonyl (MMT) All gasoline sold in the United States is required to is a manganese-containing metallic additive that is contain effective detergent additives. Use of additional blended into some gasoline to increase octane. Gasoline detergents or other additives is not needed under normal blended with MMT provides no performance advantage conditions and they would result in additional cost.
Page 307: Carbon Monoxide Warnings
STARTING AND OPERATING 305 Carbon Monoxide Warnings CAUTION! (Continued) • An out-of-tune engine or certain fuel or ignition WARNING! malfunctions can cause the catalytic converter to over- Carbon monoxide (CO) in exhaust gases is deadly. heat. If you notice a pungent burning odor or some Follow the precautions below to prevent carbon light smoke, your engine may be out of tune or monoxide poisoning:...
Page 308 306 STARTING AND OPERATING NOTE: Only the correct size nozzle opens the latches WARNING! (Continued) allowing the flapper door to open. • Guard against carbon monoxide with proper main- 4. Fill the vehicle with fuel – when the fuel nozzle tenance.
Page 309 STARTING AND OPERATING 307 Funnel Location For vehicle With Optional Spare Tire Funnel Location Inside Of Tool Kit...
Page 310 308 STARTING AND OPERATING WARNING! • Never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and may cause the “Malfunction Indicator Light”...
Page 311 STARTING AND OPERATING 309 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Automatic Wheels OFF the Manual Euro Twin Clutch Transmission Towing Condition Ground Transmission Transmission (Aisin F21-250 HD Transmission ) Flat Tow NONE Transmission in Transmission in NOT ALLOWED NEUTRAL NEUTRAL...
Page 312 310 STARTING AND OPERATING Vehicles equipped with a manual transmission, or a Euro 4. Release the brake pedal only when the parking brake Twin Clutch transmission, may be flat towed (with all is applied, or the vehicle is securely connected to a tow four wheels on the ground) at any legal highway speed, vehicle.
Page 313 WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ...313 JACKING AND TIRE CHANGING — IF EQUIPPED ......328 IF YOUR ENGINE OVERHEATS .
Page 314 312 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE ... . .341 ▫ Euro Twin Clutch Transmission... .344 SHIFT LEVER OVERRIDE ....342 ▫...
Page 315: Hazard Warning Flashers
WHAT TO DO IN EMERGENCIES 313 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel below the radio. potential for overheating by taking the appropriate action. •...
Page 316: Wheel And Tire Torque Specifications
314 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Driving with a hot cooling system could damage You or others can be badly burned by hot engine your vehicle. If the pointer rises to the H (red) mark, coolant (antifreeze) or steam from your radiator. If the instrument cluster will sound a chime.
Page 317: Torque Specifications
WHAT TO DO IN EMERGENCIES 315 Inspect the wheel mounting surface prior to mounting Torque Specifications the tire and remove any corrosion or loose particles. Lug Nut/Bolt Torque **Lug Nut/ Lug Nut/ Bolt Size Bolt Socket Size 63 Ft-Lbs (86 N·m) M12 x 1.25 17 mm Steel Wheels Only...
Page 318 316 WHAT TO DO IN EMERGENCIES Tighten the lug nuts/bolts in a star pattern until each After 25 miles (40 km) check the lug nut/bolt torque to be nut/bolt has been tightened twice. sure that all the lug nuts/bolts are properly seated against the wheel.
Page 319: Tire Service Kit - If Equipped
WHAT TO DO IN EMERGENCIES 317 TIRE SERVICE KIT — IF EQUIPPED Tire Service Kit Components And Operation Small punctures up to 1/4” (6 mm) in the tire tread can be sealed with Tire Service Kit. Foreign objects (e.g., screws or nails) should not be removed from the tire.
Page 320 318 WHAT TO DO IN EMERGENCIES Using The Mode Select Knob And Hoses Using The Power Button Your Tire Service Kit is equipped with the following Push and release the Power Button (4) once to symbols to indicate the air or sealant mode. turn On the Tire Service Kit.
Page 321: Tire Service Kit Usage Precautions
WHAT TO DO IN EMERGENCIES 319 Tire Service Kit Usage Precautions • Replace the Tire Service Kit Sealant Bottle (1) and Sealant Hose (6) prior to the expiration date (printed at the lower right hand corner on the bottle label) to assure optimum operation of the system.
Page 322 320 WHAT TO DO IN EMERGENCIES • When the Tire Service Kit sealant is in a liquid form, • Do not lift or carry the Tire Service Kit by the hoses. clean water, and a damp cloth will remove the material from the vehicle or tire and wheel components.
Page 323 WHAT TO DO IN EMERGENCIES 321 WARNING! (Continued) WARNING! (Continued) – If you are unsure of the condition of the tire or Tire Service Kit is harmful if inhaled, swallowed, the wheel. or absorbed through the skin. It causes skin, eye, •...
Page 324: Sealing A Tire With Tire Service Kit
322 WHAT TO DO IN EMERGENCIES (B) Setting Up To Use Tire Service Kit: Sealing A Tire With Tire Service Kit (A) Whenever You Stop To Use Tire Service Kit: 1. Push in the Mode Select Knob (5) and turn to the Sealant Mode position.
Page 325 WHAT TO DO IN EMERGENCIES 323 (C) Injecting Tire Service Kit Sealant Into The Reconnect the Sealant Hose (6) to the valve stem. Deflated Tire: Check that the Mode Select Knob (5) is in the Sealant Mode position and not Air Mode. Push the Power •...
Page 326 324 WHAT TO DO IN EMERGENCIES If the sealant (white fluid) does flow through the If the tire does not inflate to at least 26 psi (1.8 Bar) Sealant Hose (6): pressure within 15 minutes: 1. Continue to operate the pump until sealant is no •...
Page 327 WHAT TO DO IN EMERGENCIES 325 3. Immediately disconnect the Sealant Hose (6) from the (D) Drive Vehicle: valve stem, reinstall the cap on the fitting at the end of Immediately after injecting sealant and inflating the tire, the hose, and place the Tire Service Kit in the vehicle drive the vehicle 5 miles (8 km) or 10 minutes to ensure storage location.
Page 328 326 WHAT TO DO IN EMERGENCIES (E) After Driving: If the tire pressure is 19 psi (1.3 Bar) or higher: Pull over to a safe location. Refer to “Whenever You Stop 1. Push the Power Button (4) to turn on Tire Service Kit to Use Tire Service Kit”...
Page 329 WHAT TO DO IN EMERGENCIES 327 5. Remove the Speed Limit sticker from the instrument 4. Clean any remaining sealant from the Tire Service Kit panel after the tire has been repaired. housing. 6. Replace the Sealant Bottle (1) and Sealant Hose (6) 5.
Page 330: Jacking And Tire Changing - If Equipped
328 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING — IF EQUIPPED WARNING! (Continued) • Never start or run the engine while the vehicle is WARNING! on a jack. • Do not attempt to change a tire on the side of the •...
Page 331: Spare Tire Removal
WHAT TO DO IN EMERGENCIES 329 Spare Tire Removal Jack Location 1 — Emergency Fuel Fill Funnel 2 — Jack Spare Tire Location 3 — Jack Handle The spare tire is stowed in underneath the rear cargo area 4 — Emergency Allen key 5 —...
Page 332: Preparations For Jacking
330 WHAT TO DO IN EMERGENCIES 2. Remove the jack handle and use the wrench end to Preparations For Jacking lower the spare tire. 1. Park the vehicle on a firm level surface, avoiding ice or 3. When the spare is clear, replace the jack tools. slippery areas.
Page 333: Jacking Instructions
WHAT TO DO IN EMERGENCIES 331 4. Place the shift lever in PARK (Euro Twin Clutch Jacking Instructions Transmission) or REVERSE (manual transmission). WARNING! 5. Turn Off the ignition. Carefully follow these tire changing warnings to 6. Block both the front and rear of the wheel diagonally help prevent personal injury or damage to your opposite of the jacking position.
Page 334 332 WHAT TO DO IN EMERGENCIES WARNING! (Continued) CAUTION! • Do not let anyone sit in the vehicle when it is on a Do not attempt to raise the vehicle by jacking on jack. locations other than those indicated in the Jacking •...
Page 335 WHAT TO DO IN EMERGENCIES 333 Front Jacking Location Rear Jacking Location NOTE: There are front and rear jacking locations on each side of the body (as indicated by the traingular lift point symbols on the sill molding).
Page 336 334 WHAT TO DO IN EMERGENCIES 4. Place the jack underneath the lift area that is closest to CAUTION! the flat tire. Turn the jack screw clockwise to firmly engage the jack saddle with the lift area of the sill Be sure to mount the spare tire with the valve stem flange, centering the jack saddle between the locating facing outward.
Page 337 WHAT TO DO IN EMERGENCIES 335 to Torque Specifications in this section for proper lug WARNING! nut torque. If in doubt about the correct tightness, have them checked with a torque wrench by your • To avoid the risk of forcing the vehicle off the jack, authorized dealer or at a service station.
Page 338: Spare Tire Stowage
336 WHAT TO DO IN EMERGENCIES pack. Jump-starting can be dangerous if done improperly Spare Tire Stowage so please follow the procedures in this section carefully. Rotate the jack wrench tool on the winch drive nut clockwise (the flat tire must not be connected to the NOTE: When using a portable battery booster pack, winch) until effort becomes heavy and an audible click is follow the manufacturer’s operating instructions and...
Page 339: Preparations For Jump-Start
WHAT TO DO IN EMERGENCIES 337 Preparations For Jump-Start WARNING! The battery in your vehicle is located on the drivers side • Take care to avoid the radiator cooling fan when- of the engine compartment. ever the hood is raised. It can start anytime the ignition switch is ON.
Page 340: Jump-Starting Procedure
338 WHAT TO DO IN EMERGENCIES 3. Remove the protective cover over the remote positive Jump-Starting Procedure (+) battery post. To remove the cover, pull upward on the cover. WARNING! 4. If using another vehicle to jump-start the battery, park Failure to follow this jump-starting procedure could the vehicle within the jumper cables reach, set the result in personal injury or property damage due to...
Page 341 WHAT TO DO IN EMERGENCIES 339 Follow these steps to disconnect the negative (-) battery 4. Connect the opposite end of the negative (-) jumper cable: cable to the negative (-) battery cable terminal of the discharged vehicle. 1. Pull outward on the negative (-) battery cable terminal release lever to the open position.
Page 342 340 WHAT TO DO IN EMERGENCIES Disconnecting The Jumper Cables Follow these steps to connect the negative (-) battery cable: 1. Disconnect the negative (-) jumper cable from the negative (-) battery cable terminal of the vehicle with 1. Connect the negative (-) battery terminal to the nega- the discharged battery.
Page 343: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 341 FREEING A STUCK VEHICLE CAUTION! (Continued) If your vehicle becomes stuck in mud, sand or snow, it cycles. This will minimize overheating and reduce can often be moved using a rocking motion. Turn the the risk of clutch or transmission failure during steering wheel right and left to clear the area around the prolonged efforts to free a stuck vehicle.
Page 344: Shift Lever Override
342 WHAT TO DO IN EMERGENCIES SHIFT LEVER OVERRIDE CAUTION! (Continued) If a malfunction occurs and the shift lever cannot be • Revving the engine or spinning the wheels too fast moved out of the PARK position, you can use the may lead to transmission overheating and failure.
Page 345: Towing A Disabled Vehicle
WHAT TO DO IN EMERGENCIES 343 7. The vehicle may then be started in NEUTRAL. TOWING A DISABLED VEHICLE 8. Reinstall the shift lever boot. NOTE: This section describes procedures for towing a disabled vehicle using a commercial towing service. Proper towing or lifting equipment is required to prevent damage to your vehicle.
Page 346: Euro Twin Clutch Transmission
344 WHAT TO DO IN EMERGENCIES CAUTION! CAUTION! • Do not use sling-type equipment when towing. Towing this vehicle in violation of the above require- Vehicle damage may occur. ments can cause severe engine and/or transmission damage. Damage from improper towing is not cov- •...
Page 347: Automatic Transmission
WHAT TO DO IN EMERGENCIES 345 CAUTION! CAUTION! • Towing this vehicle in violation of the above re- • DO NOT flat tow any vehicle equipped with a quirements can cause severe transmission damage. conventional automatic transmission. Damage to Damage from improper towing is not covered un- the drivetrain will result.
Page 348: Ignition Key Removal Override
346 WHAT TO DO IN EMERGENCIES 5. Using the Allen key, undo the lower steering column IGNITION KEY REMOVAL OVERRIDE cover screws, and remove the lower cover. This vehicle is equipped with a Key Ignition Park Inter- lock which requires the transmission to be in PARK before the ignition switch can be turned to the LOCK/ OFF (key removal) position.
Page 349: Cap-Less Fuel Fill Funnel
WHAT TO DO IN EMERGENCIES 347 CAUTION! It is advisable to contact your Authorized Dealer to have the reinstall procedure carried out. If you would like to proceed in performing the reinstall procedure special attention must be paid to the correct coupling of the clips.
Page 351 MAINTAINING YOUR VEHICLE CONTENTS ENGINE COMPARTMENT — 1.4L TURBO ..351 ▫ Body Lubrication .....362 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .352 ▫...
Page 352 350 MAINTAINING YOUR VEHICLE ▫ Automatic Transmission — Aisin F21-250 HD ▫ Front Turn Signal, Parking And Daytime Transmission — If Equipped ... . .380 Running Lamps..... . .399 ▫...
Page 353: Engine Compartment - 1.4L Turbo
MAINTAINING YOUR VEHICLE 351 ENGINE COMPARTMENT — 1.4L TURBO 1 — Air Cleaner Filter 4 — Battery 7 — Coolant Pressure Cap 2 — Engine Oil Dipstick 5 — Front Distribution Unit (Fuses) 8 — Coolant Pressure Bottle 3 — Brake Fluid Reservoir 6 —...
Page 354: Onboard Diagnostic System - Obd Ii
352 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and Euro Twin could also affect fuel economy and driveability.
Page 355: Dealer Service
MAINTAINING YOUR VEHICLE 353 DEALER SERVICE MAINTENANCE PROCEDURES Your authorized dealer has the qualified service person- The pages that follow contain the required maintenance nel, special tools, and equipment to perform all service services determined by the engineers who designed your operations in an expert manner.
Page 356: Engine Oil
354 MAINTAINING YOUR VEHICLE Engine Oil CAUTION! (Continued) Checking Oil Level • Your vehicle has been built with improved fluids that protect the performance and durability of your To assure proper engine lubrication, the engine oil must be vehicle and also allow extended maintenance inter- maintained at the correct level.
Page 357 MAINTAINING YOUR VEHICLE 355 Engine Oil Selection CAUTION! For best performance and maximum protection for tur- Do not overfill the engine with oil. Overfilling the bocharged engines under all types of operating condi- engine with oil will cause oil aeration, which can tions, the manufacturer recommends synthetic engine lead to loss of oil pressure and an increase in oil oils that are API Certified and meet the requirements of...
Page 358: Engine Oil Filter
356 MAINTAINING YOUR VEHICLE The engine oil filler cap also shows the recommended Engine Oil Filter engine oil viscosity for your engine. For information on The engine oil filter should be replaced with a new filter engine oil filler cap location, refer to “Engine Compart- at every engine oil change.
Page 359: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 357 Maintenance-Free Battery WARNING! Your vehicle is equipped with a maintenance-free battery. The air induction system (air cleaner, hoses, etc.) can You will never have to add water, nor is periodic main- provide a measure of protection in the case of engine tenance required.
Page 360: Air Conditioner Maintenance
358 MAINTAINING YOUR VEHICLE WARNING! (Continued) CAUTION! (Continued) an output greater than 12 Volts. Do not allow cable battery case. Cable clamps should be tight on the clamps to touch each other. terminal posts and free of corrosion. • Battery posts, terminals, and related accessories •...
Page 361 MAINTAINING YOUR VEHICLE 359 WARNING! CAUTION! • Use only refrigerants and compressor lubricants Do not use chemical flushes in your air conditioning approved by the manufacturer for your air condi- system as the chemicals can damage your air condi- tioning system. Some unapproved refrigerants are tioning components.
Page 362 360 MAINTAINING YOUR VEHICLE A/C Air Filter WARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result. The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following procedure to re- place the filter: 1.
Page 363 MAINTAINING YOUR VEHICLE 361 A/C Air Filter Access Door Open A/C Air Filter Removal 6. Remove the particulate air filters from the HVAC air 7. Install the A/C air filter with the air filter position inlet housing. Pull the filter elements straight out of indicators pointing in the same direction as removal.
Page 364: Body Lubrication
362 MAINTAINING YOUR VEHICLE be lubricated periodically with a lithium based grease, CAUTION! such as MOPAR® Spray White Lube to assure quiet, easy operation and to protect against rust and wear. Prior to The A/C air filter is identified with an arrow to the application of any lubricant, the parts concerned indicate airflow direction through the filter.
Page 365: Wiper Blades
MAINTAINING YOUR VEHICLE 363 NOTE: Life expectancy of wiper blades varies depending Wiper Blades on geographical area and frequency of use. Poor perfor- Clean the rubber edges of the wiper blades and the mance of blades may be present with chattering, marks, windshield and rear window periodically with a sponge water lines or wet spots.
Page 366 364 MAINTAINING YOUR VEHICLE To have a correct activation of strategy, the Service Function Deactivation: Position command (antipanic) must be active for at least The functionality is reset if: half a second. • Turn the ignition to the MAR/RUN position. At every valid activation of Service Position command, the wiper blades are activated for 250 ms.
Page 367 MAINTAINING YOUR VEHICLE 365 Rear Wiper Blade Removal/Installation 1. Lift the rear wiper arm upward to raise the wiper blade off of the liftgate glass. 2. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder.
Page 368: Adding Washer Fluid
366 MAINTAINING YOUR VEHICLE Adding Washer Fluid The windshield washer fluid reservoir is located in the engine compartment, and the fluid level should be checked at regular intervals. Fill the reservoir with wind- shield washer solvent (not engine coolant/ antifreeze). Refer to “Engine Compartment”...
Page 369: Exhaust System
MAINTAINING YOUR VEHICLE 367 Exhaust System WARNING! The best protection against carbon monoxide entry into • Exhaust gases can injure or kill. They contain the vehicle body is a properly maintained engine exhaust carbon monoxide (CO), which is colorless and system.
Page 370 368 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- portant to keep the engine properly tuned to assure • The catalytic converter requires the use of un- proper catalyst operation and prevent possible catalyst leaded fuel only.
Page 371: Cooling System
MAINTAINING YOUR VEHICLE 369 To minimize the possibility of catalytic converter dam- Cooling System age: WARNING! • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in • When working near the radiator cooling fan, dis- motion.
Page 372 370 MAINTAINING YOUR VEHICLE Coolant Checks If the engine coolant (antifreeze) is dirty or contains visible sediment, have an authorized dealer clean and Check engine coolant (antifreeze) protection every 12 flush with OAT coolant (antifreeze) (conforming to months (before the onset of freezing weather, where MS.90032).
Page 373 MAINTAINING YOUR VEHICLE 371 CAUTION! (Continued) CAUTION! (Continued) Organic Additive Technology (OAT) engine cool- • This vehicle has not been designed for use with ant is different and should not be mixed with propylene glycol-based engine coolant (antifreeze). Hybrid Organic Additive Technology (HOAT) en- Use of propylene glycol-based engine coolant (an- gine coolant (antifreeze) or any “globally compat- tifreeze) is not recommended.
Page 374 372 MAINTAINING YOUR VEHICLE Please review these recommendations for using Organic Please note that it is the owner’s responsibility to main- Additive Technology (OAT) engine coolant (antifreeze) tain the proper level of protection against freezing ac- that meets the requirements of FCA Material Standard cording to the temperatures occurring in the area where MS.90032.
Page 375 MAINTAINING YOUR VEHICLE 373 Cooling System Pressure Cap WARNING! (Continued) The cap must be fully tightened to prevent loss of engine • Do not use a pressure cap other than the one coolant (antifreeze) and to ensure that engine coolant specified for your vehicle.
Page 376 374 MAINTAINING YOUR VEHICLE Coolant Level Points To Remember The coolant expansion bottle provides a quick visual NOTE: When the vehicle is stopped after a few miles/ method for determining that the coolant level is ad- kilometers of operation, you may observe vapor coming equate.
Page 377: Brake System
MAINTAINING YOUR VEHICLE 375 • If frequent engine coolant (antifreeze) additions are Brake System required, the cooling system should be pressure tested In order to assure brake system performance, all brake for leaks. system components should be inspected periodically. • Maintain engine coolant (antifreeze) concentration at a Refer to the “Maintenance Schedule”...
Page 378 376 MAINTAINING YOUR VEHICLE Be sure to clean the top of the master cylinder area before Use only manufacturer’s recommended brake fluid. Re- removing the cap. If necessary, add fluid to bring the fer to “Fluids, Lubricants, And Genuine Parts” in “Main- fluid level up to the requirements described on the brake taining Your Vehicle”...
Page 379: Manual Transmission - If Equipped
MAINTAINING YOUR VEHICLE 377 WARNING! (Continued) CAUTION! cylinder reservoir cap secured at all times. Brake Use of improper brake fluids will affect overall fluid in a open container absorbs moisture from the clutch system performance. Improper brake fluids air resulting in a lower boiling point. This may may damage the clutch system resulting in loss of cause it to boil unexpectedly during hard or pro- clutch function and the ability to shift the transmis-...
Page 380: Euro Twin Clutch Transmission - If Equipped
378 MAINTAINING YOUR VEHICLE Fluid Level Check Euro Twin Clutch Transmission — If Equipped Check the fluid level by removing the fill plug. The fluid Selection Of Lubricant level should be between the bottom of the fill hole and a It is important to use the proper transmission fluid to point not more than 3/16 inch (4.7 mm) below the bottom ensure optimum transmission performance and life.
Page 381 MAINTAINING YOUR VEHICLE 379 Special Additives Fluid Level Check The manufacturer strongly recommends against using The fluid level is preset at the factory and does not any special additives in the transmission. require adjustment under normal operating conditions. Routine fluid level checks are not required, therefore the Transmission fluid is an engineered product and its transmission has no dipstick.
Page 382: Automatic Transmission - Aisin F21-250 Hd Transmission - If Equipped
380 MAINTAINING YOUR VEHICLE Fluid Changes Refer to “Fluids, Lubricants, And Genuine Parts” in this section for fluid specifications. It is important to maintain Under normal operating conditions, the fluid installed at the transmission fluid at the correct level using the the factory will provide satisfactory lubrication for the recommended fluid.
Page 383 MAINTAINING YOUR VEHICLE 381 Special Additives Fluid Level Check The manufacturer strongly recommends against using The fluid level is preset at the factory and does not any special additives in the transmission. require adjustment under normal operating conditions. Routine fluid level checks are not required, therefore the Automatic Transmission Fluid (ATF) is an engineered transmission has no dipstick.
Page 384: Appearance Care And Protection From Corrosion
382 MAINTAINING YOUR VEHICLE Fluid And Filter Changes The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion Under normal operating conditions, the fluid installed at resistance built into your vehicle. the factory will provide satisfactory lubrication for the life of the vehicle.
Page 385 MAINTAINING YOUR VEHICLE 383 Washing CAUTION! • Wash your vehicle regularly. Always wash your ve- • Do not use abrasive or strong cleaning materials hicle in the shade using MOPAR® Car Wash, or a mild such as steel wool or scouring powder that will car wash soap, and rinse the panels completely with scratch metal and painted surfaces.
Page 386 384 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, Wheel And Wheel Trim Care touch them up immediately. The cost of such repairs is • All wheels and wheel trim, especially aluminum and considered the responsibility of the owner.
Page 387 MAINTAINING YOUR VEHICLE 385 • For tough stains, apply MOPAR® Total Clean, or a CAUTION! mild soap solution to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. Do not use scouring pads, steel wool, a bristle brush, or metal polishes.
Page 388 386 MAINTAINING YOUR VEHICLE Your leather upholstery can be best preserved by regular CAUTION! cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery Direct contact of air fresheners, insect repellents, and should be removed promptly with a damp cloth.
Page 389 MAINTAINING YOUR VEHICLE 387 Cleaning Headlights cleaner. Use caution when cleaning the inside rear win- dow equipped with electric defrosters or windows Your vehicle has plastic headlights that are lighter and equipped with radio antennas. Do not use scrapers or less susceptible to stone breakage than glass headlights.
Page 390 388 MAINTAINING YOUR VEHICLE Instrument Panel Bezels Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical CAUTION! solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. When installing hanging air fresheners in your ve- hicle, read the installation instructions carefully.
Page 391: Fuses
MAINTAINING YOUR VEHICLE 389 WARNING! WARNING! (Continued) with another fuse of higher amp rating. Never A frayed or torn belt could rip apart in a collision and replace a blown fuse with metal wires or any other leave you with no protection. Inspect the belt system material.
Page 392: Underhood Fuses
390 MAINTAINING YOUR VEHICLE The ID number of the electrical component correspond- Underhood Fuses ing to each fuse can be found on the back of the cover. The Front Distribution Unit is located on the right side of the engine compartment, next to the battery. To access the fuses, press the release tabs and remove the cover.
Page 393 MAINTAINING YOUR VEHICLE 391 Cavity Maxi Fuse Mini Fuse Description 60 Amp Blue – Body Controller 60 Amp Blue – Body Controller Rear Distribution Unit 20 Amp Yellow – Ignition Switch 40 Amp Orange – Anti-Lock Brake Pump 70 Amp Tan –...
Page 394 392 MAINTAINING YOUR VEHICLE Cavity Maxi Fuse Mini Fuse Description – 5 Amp Tan Powertrain (Multiair – If Equipped) – 7.5 Amp Brown Air Conditioning – 30 Amp Green Rear Defroster – 15 Amp Blue Fuel Pump – 20 Amp Yellow Anti-Lock Brake Valves –...
Page 395: Interior Fuses
MAINTAINING YOUR VEHICLE 393 Interior Fuses Rear Interior Fuses The interior fuse panel is part of the Body Control The rear interior fuse panel is located on the driver’s side Module (BCM) and is located on the driver’s side under in the rear compartment.
Page 396: Vehicle Storage
394 MAINTAINING YOUR VEHICLE air conditioning system at idle for about five minutes VEHICLE STORAGE in the fresh air and high blower setting. This will If you are leaving your vehicle dormant for more than 21 ensure adequate system lubrication to minimize the days, you may want to take these steps to protect your possibility of compressor damage when the system is battery.
Page 397 MAINTAINING YOUR VEHICLE 395 Exterior Bulbs Bulb Number Front Low and High Beam Headlamp HIR2LL Front Turn Signal Lamps WY21W Front Parking/Daytime Running Lamps W21/5W Front Side Marker Lamps LED (See Authorized dealer) Rear Tail/Stop Lamps P21/5W Rear Tail Lamp LED (See Authorized dealer) Rear Turn Signal Lamps P21W...
Page 398: Bulb Replacement
396 MAINTAINING YOUR VEHICLE Bulb Number License Plate Lamps NOTE: Numbers refer to commercial bulb types that can be purchased from your authorized dealer. If a bulb needs to be replaced, visit your authorized dealer or refer to the applicable Service Manual. BULB REPLACEMENT NOTE: Lens fogging can occur under certain atmo- spheric conditions.
Page 399 MAINTAINING YOUR VEHICLE 397 2. Rotate the bulb counter-clockwise. 4. Disconnect the electrical connector from the bulb. Bulb Removal Procedure Electrical Connector Removal 3. Remove the bulb when all the tabs are aligned with the openings in the metal holder.
Page 400 398 MAINTAINING YOUR VEHICLE 5. Install the new bulb and rotate clockwise to lock in 6. Reinstall the plastic cap. place. Headlamp Sealing Cap Installation New Bulb Installation...
Page 401: Front Turn Signal, Parking And Daytime Running Lamps
MAINTAINING YOUR VEHICLE 399 Front Turn Signal, Parking And Daytime Running Front, Rear Roof Lamps Lamps 1. Remove two screw and remove the lamp assembly. 1. Turn front wheels inboard to access upper cover in 2. Remove the socket bulb by turning counterclockwise. wheel liner.
Page 402: Center High-Mounted Stop Lamp (Chmsl)
400 MAINTAINING YOUR VEHICLE 5. Remove the two screws that secure the backplate to 8. Remove the backup lamp bulb by pulling straight out. the tail lamp housing. 9. Replace lamps as required and reinstall lamp. 6. Separate the backplate from the tail lamp housing. Center High-Mounted Stop Lamp (CHMSL) 7.
Page 403: Fluids, Lubricants, And Genuine Parts
MAINTAINING YOUR VEHICLE 401 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant – 1.4L Turbo Engine We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-90032.
Page 404 402 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) need to be drained, flushed, and refilled with fresh • Mixing of engine coolant (antifreeze) other than OAT coolant (conforming to MS.90032), by an au- specified Organic Additive Technology (OAT) en- thorized dealer as soon as possible. gine coolant (antifreeze), may result in engine •...
Page 405: Chassis
MAINTAINING YOUR VEHICLE 403 Chassis Component Fluid, Lubricant, or Genuine Part Manual Transmission – If Equipped We recommend you use MOPAR® C Series Manual & Dual Dry Clutch Transmission Fluid Euro Twin Clutch Transmission – If Gear Oil: Use only MOPAR® C Series Manual & Dual Dry Clutch Equipped Transmission Fluid or equivalent.
Page 407: Maintenance Schedules
MAINTENANCE SCHEDULES CONTENTS MAINTENANCE SCHEDULE ....406 ▫ Maintenance Chart ....408...
Page 408 406 MAINTENANCE SCHEDULES Your authorized dealer will reset the oil change indicator MAINTENANCE SCHEDULE message after completing the scheduled oil change. If a Your vehicle is equipped with an automatic oil change scheduled oil change is performed by someone other indicator system.
Page 409 MAINTENANCE SCHEDULES 407 Once A Month Or Before A Long Trip: At Every Oil Change Interval As Indicated By Oil Change Indicator System: • Check engine oil level. • Change oil and filter. • Check windshield washer fluid level. • Rotate the tires. Rotate at the first sign of irregu- •...
Page 410 408 MAINTENANCE SCHEDULES Maintenance Chart Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends and boot seals, and re- place if necessary. Inspect the brake linings, park- ing brake function.
Page 411 MAINTENANCE SCHEDULES 409 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Maintenance Replace engine air filter. Replace cabin air filter. Replace Brake Fluid every two years Clean and lube sun roof tracks. Replace spark plugs. **...
Page 412 410 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change the transmission fluid (manual, or Euro Twin Clutch) if using your vehicle for any of the following: trailer towing, heavy loading, taxi, police, delivery ser- vice (commercial service), off- road, desert operation or more than 50% of your driving is at...
Page 413 MAINTENANCE SCHEDULES 411 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Inspect and replace PCV valve if necessary. Replace the timing belt. ** The spark plug change interval is mileage based only, yearly intervals do not apply.
Page 414 412 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 415 Washington, D.C..... . .418 ▫ FIAT Customer Center ....416 ▫...
Page 416 414 IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION ▫ Traction Grades ..... . .421 UNIFORM TIRE QUALITY GRADES ..420 ▫...
Page 417: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 415 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 418: Fiat Customer Center
• If for some reason you are still not satisfied, talk to the 1-888-242-6342 general manager or owner of the authorized dealer. FIAT Canada Customer Center They want to know if you need assistance. P.O. Box 1621 Windsor, Ontario N9A 4H6 Phone: •...
Page 419: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
IF YOU NEED CONSUMER ASSISTANCE 417 Warranty expires. The manufacturer stands behind only Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
Page 420: Warranty Information
418 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment WARRANTY INFORMATION when you purchased the vehicle. An authorized dealer See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of FCA USA LLC training to assure that you are absolutely delighted with warranties applicable to this vehicle and market.
Page 421: In Canada
Canadian government should contact Trans- diagnosing/troubleshooting, problem solving, maintain- port Canada, Motor Vehicle Defect Investigations and ing, servicing, and repairing FIAT Group Automobiles Recalls at 1-800-333-0510 or go to http://www.tc.gc.ca/ vehicles. A complete working knowledge of the vehicle,...
Page 422 The following tire grading categories were established by assistance of service and engineering specialists to ac- the National Highway Traffic Safety Administration. The quaint you with specific FIAT Group Automobiles ve- specific grade rating assigned by the tire’s manufacturer hicles. Included are starting, operating, emergency and...
Page 423 IF YOU NEED CONSUMER ASSISTANCE 421 Treadwear WARNING! The Treadwear grade is a comparative rating, based on The traction grade assigned to this tire is based on the wear rate of the tire when tested under controlled straight-ahead braking traction tests, and does not conditions on a specified government test course.
Page 424 422 IF YOU NEED CONSUMER ASSISTANCE The grade C corresponds to a level of performance, which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel, than the minimum required by law.
Page 425 INDEX...
Page 426 424 INDEX Adding Engine Coolant (Antifreeze) ... .371 Air Conditioning Refrigerant ....358, 359 Adding Fuel ......306 Air Conditioning System .
Page 427 INDEX 425 Autostick ......253 Brake System ......260, 375 Fluid and Filter Changes .
Page 428 426 INDEX Chains, Tire ......294 Child Safety Locks ......24 Changing A Flat Tire .
Page 429 INDEX 427 Coolant Level ..... .370, 374 Dipsticks Disposal of Used Coolant ....373 Automatic Transmission .
Page 430 428 INDEX Electronic Vehicle Information Center (EVIC) . .135, 180 Flooded, Starting ..... . .231 Exit Trip ......185 Fuel Requirements .
Page 431 INDEX 429 Filler Location Fuel ......169 Fuel ........302 Filters Adding .
Page 432 430 INDEX Gasoline (Fuel)......302, 400 Passing ......114 Gasoline, Reformulated .
Page 433 INDEX 431 Introduction ......4 Liftgate (Sedan) ......28 Light Bulbs .
Page 434 432 INDEX Security Alarm ......15 Maintenance Procedures ....353 Service .
Page 435 INDEX 433 New Vehicle Break-In Period ....82 Oil Filter, Selection ......356 Onboard Diagnostic System .
Page 436 434 INDEX Pregnant Women and Seat Belts ....40 Replacement Bulbs ......394 Preparation for Jacking .
Page 437 INDEX 435 Lap/Shoulder Belts ..... . .35 Reclining ......99 Lap/Shoulder Belt Untwisting .
Page 438 436 INDEX Starting ....... .229 Tachometer......169 Automatic Transmission .
Page 439 INDEX 437 Pressure Warning Light ....169 Transmission Quality Grading ......420 Automatic .
Page 440 438 INDEX Unleaded Gasoline ......302 Washers, Windshield ..... . .119 Untwisting Procedure, Seat Belt .
Page 441 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 442 FCA US LLC 15BF-126-AC Third Edition Printed in U.S.A.

Fiat 500L 2015 Owner's Manual

Introduction

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Starting Procedures

Automatic Transmission

If Equipped

Autostick

Driving on Slippery Surfaces

Driving through Water

Electric Power Steering

Parking Brake

Brake System

Electronic Brake Control System

Tire Safety Information

Tires - General Information

Tire Chains (Traction Devices)

Tire Rotation Recommendations

Tire Pressure Monitoring System (Tpms)

FUEL REQUIREMENTS - 1.4L Turbo

What to Do in Emergencies

Maintaining Your Vehicle

If You Need Consumer Assistance

?? be Reasonablewith Requests

?? Prepare a List

?? Prepare for the Appointment

Your Vehicle

?? FIAT Customer Center

?? Service Contract

?? in Canada

?? in the 50United Statesand

Quick Links

Chapters

Related Manuals for Fiat 500L 2015

Summary of Contents for Fiat 500L 2015