Table of Contents
Advertisement
Icon
Passenger Temperature Knob
Provides the passenger with independent temperature control. Rotate the knob clockwise for warmer temperature settings. Ro-
tate the knob counterclockwise for cooler temperature settings. When the SYNC feature is active, the passenger' s temperature
will move with the driver' s temperature. Acting on the passenger's temperature will cause the Sync feature turn off.
Blower Control Knob
Blower Control is used to regulate the amount of air forced through the climate system. There are eight blower speeds available.
The speeds can be selected using the blower control knob on the faceplate. The blower speed increases as you turn the blower
control knob clockwise from the lowest blower setting. The blower speed decreases as you turn the blower control knob counter-
clockwise.
Mode Control: Below are the modes of air distribution that can be selected individually, or in combination with each other to reach a desired distribution
Windshield Mode
Windshield Mode
Air comes from the outlets directed at the windshield meant for defrosting, and side window demisting. This setting works best in
cold or snowy conditions that require extra heat to the windshield.
Panel Mode
Panel Mode
Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air.
The air vanes of the center outlets and outboard outlets can be moved up and down or side to side to regulate airflow direction.
There is a shut off wheel located below the air vanes to shut off or adjust the amount of airflow from these outlets.
Floor Mode
Floor Mode
Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets.
24
Description
mode.
Advertisement
Table of Contents
