Table of Contents
Advertisement
Inserting and Removing the Blades
Remove the battery from the unit before inserting or detaching the blades.
Always wear protective gloves while handling the blade.
1. Turn the grass and hedge shears upside down and pull the clip of the gear
cover (step 1) upwards. Hold the gear cover firmly and pull the cover
forwards to remove from the grass and hedge shears (step 2).
2. After taking off the blade you will see the gear wheel. Make sure that no
dirt or grass leaves get into the gear. Remove any dirt around the gear
prior to re-attach the blades.
Attention! Do not touch the safety switch and the ON/OFF switch prior to re-
attach the gear cover. There is risk of injury!
Operation
Step 2
Step 1
30
Advertisement
Table of Contents
