Chapter 2 - Specifications; Conduit Specifications - Multitech MultiConnect Conduit MTCDT-LAP3 Hardware Manual

Chapter 2 – Specifications

Conduit Specifications

Category
General
Performance
Frequency Bands (MHz)
Physical Description
Dimensions
Weight
Connectors
Connectors
Power Requirements
Input Voltage
Environment
Operating Environment
Storage Environment
Relative Humidity
Certifications
Country Approval
Radio & EMC Compliance
Safety Compliance
Telecom Approvals
® TM
MultiConnect Conduit MTCDT-LAP3 Hardware Guide (AU)
Description
4G LTE Cat 1 with 3G Fallback Release 9
4G LTE Cat 1 FDD 2100 (B1), 850 (B5) , 900 (B8), 1800 (B3), and 700
(B28)
3G WCDMA 2100 (B1), GSM 850 (B5), and EGSM 900 (B8)
See the Conduit Demensions Drawing
15.6 oz. (442.25 grams) with no accessory cards installed
1 USB device micro Type B debug port (behind nameplate)
1 RJ-45 Ethernet port
1 USB micro port
2 cellular antenna connectors
1 Wi-Fi/Bluetooth connector
1 GPS antenna connector
9-32 Volts
1
-30° to +70° C
-40° to +85° C
20 to 90% non-condensing
RCM (Australia)
EN 55022:2010
EN 301 489
FCC Part 15 Class B
IC Class B
UL/cUL 60950-1 2nd Ed.
IEC 60950-1 2nd Ed. Am. 1 and Am. 2
Telstra
SPECIFICATIONS
7