Requirements; Basics - Siemens Simatic SM331 Getting Started

Requirements

2.1

Basics

Basic Knowledge Required
No special knowledge of the field of automation technology is required in order to understand
the Getting Started guide. As the configuration of the analog module is done with the
software STEP7, proficiency in STEP7 would be advantageous.
Further information on STEP7 can be found in the electronic manuals that are supplied with
STEP7.
You will also need to know how to use computers or PC-like equipment (such as
programming devices) under Windows 95/98/2000/NT or XP.
Required hardware and software
The scope of delivery of the analog module consists of 2 parts:
● The module itself
● A front connector, which enables you to conveniently connect the power supply and the
Analog module components
Quantity
The general SIMATIC components required for the example are as follows:
SIMATIC components of the example station
Quantity
SM331; AI 8x12 Bit Getting Started part 1: 4 -20mA
Getting Started, 11/2006, A5E00253410-02
data cables.
Article
1 SM 331, Electrically ISOLATED 8 AI, ALARM DIAGNOSTICS
1 20-pin FRONT CONNECTOR with spring contacts
Article
1 PS 307 Power Supply AC 120/230V, DC 24V, 5A
1 CPU 315-2 DP
1 MICRO MEMORY CARD, NFLASH, 4 MB
1 SIMATIC S7-300, RAIL L=530MM
1 Programming device (PD) with MPI interface and MPI cable
PC with corresponding interface card
2
Order number
6ES7331-7KF02-0AB0
6ES7392-1BJ00-0AA0
Order number
6ES7307-1EA00-0AA0
6ES7315-2AG10-0AB0
6ES7953-8LM00-0AA0
6ES7390-1AF30-0AA0
depending on the
configuration
2-1