Preparation; Checking The Product - Vexta aStep AS Series Operating Manual

Preparation

This section covers the points to be checked along with the names and functions of respective parts.

Checking the product

Upon opening the package, verify that the items listed below are included.
Report any missing or damaged items to the branch or sales office from which you purchased the product.
Verify the model number of the purchased unit against the number shown on the package label.
Check the model number of the motor and driver against the number shown on the nameplate.
The unit models and corresponding motor/driver combinations are listed on pages 10 to 13.
Motor 1 Unit ∗
Illustration shows the round
shaft type with
electromagnetic brake.
∗ A parallel key (1 unit) is supplied
with all geared-type motors
(excluding the AS66 TH geared
type).
8
Driver mounting brackets
Control input/output connector
Driver 1 Unit
Varistor
Varistor supplied with the motor with
an electromagnetic-brake type
Screws for driver mounting
2 pieces brackets (M3)
Operating manual
1 set
1 piece
4 pieces
1 copy