Electronic Vehicle Information Center (Evic) Displays - Jeep Cherokee Operating Information Manual

The system allows the driver to select informa-
tion by pressing the following buttons mounted
on the steering wheel:
EVIC Steering Wheel Buttons
MENU Button
Press and release the MENU but-
ton and the mode displayed will
change between Trip Functions,
Uconnect™ gps (if equipped),
System Status, and Personal Set-
tings.
SCROLL Button
Press the SCROLL button to scroll
through Trip Functions, System
Status Messages, and Personal
Settings (Customer-Programmable
Features).
FUNCTION SELECT Button
Press and release the FUNCTION
SELECT button for access to main
menus, sub-menus or to select a
personal setting in the setup
menu.
COMPASS Button
Press and release the COMPASS/
TEMPERATURE button to display
one of eight compass readings
and the outside temperature.
Electronic Vehicle Information
Center (EVIC) Displays
When the appropriate conditions exist, the
EVIC displays the following messages:
• Key in Ignition
• Turn Signal On (with a continuous warning
chime)
• Left Front Turn Signal Lamp Out (with a
single chime)
• Left Rear Turn Signal Lamp Out (with a single
chime)
• Right Front Turn Signal Lamp Out (with a
single chime)
• Right Rear Turn Signal Lamp Out (with a
single chime)
• RKE Battery Low (with a single chime)
• Memory #1/#2 Profile Set
• Memory #1/#2 Profile Recall
• Memory System Disabled – Vehicle Not in
Park (with a single chime) — automatic
transmission
• Memory System Disabled – Vehicle in Motion
(with a single chime) — manual transmission
• Memory System Disabled – Seat Belt Buck-
led (with a single chime)
• Personal Settings Not Avail – Vehicle Not in
Park — automatic transmission
133