Actron Elite AutoScanner CP9185 User Manual page 74

Global OBD II Diagnostics
From Datastream Menu:
1. Select Record Data.
Follow all instructions on display.
The ScanTool can maintain only one recording. Make sure to
thoroughly review old recording before erasing.
If a recording currently exists in
4 4
memory, a message prompting to
erase data is displayed.
Scan Tool validates list of global PIDs from vehicle.
2. Refer to View Data to setup Custom List or View Entire List.
There are 2 types of trigger methods used:
Trigger on Codes is not available on all vehicles.
4 – 10 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
•Use UP or
key until Record Data is
highlighted.
•Press ENTER.
Manual Trigger - allows operator to use the
recording.
Trigger On Codes - automatically triggers when a diagnostic
trouble code (DTC) is detected by vehicle.
DOWN arrow
Datastream Menu
View Data
Record Data
Record Data
Review Data
Print Data
Record Data
Previous recording
in memory. Do you
want to erase it and
make a new one?
<Yes> <No>
ENTER key to start
?
A