Actron Elite AutoScanner CP9185 User Manual page 50

Using The Scan Tool
From System Setup menu:
1.Select Memory Test.
•Use
key until Memory Test is
highlighted.
•Press
Dots along the bottom of the
screen show progress of the
Memory Test.
Memory Test may take
3
several minutes to complete.
Memory Test results display.
2. Return to System Setup menu.
•Press
3 – 16 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
UP or DOWN arrow
.
ENTER
If no problems were
detected, then PASS is dis-
played
If RAM fails, an error message is shown.
If ROM fails, a checksum is shown.
.
ENTER
System Setup
Contrast Adjust
Be eper
Auto Power Off
Tool Information
Display Test
Keyboard Test
Memory Test Memory Test
Memory Test
RAM
ROM FAIL 1234
............
Pass