Actron Elite AutoScanner CP9185 User Manual page 133

Ford Historic (OBD I) Diagnostics
The following actions do not apply to MECS vehicles.
For a 7.3L Diesel, press the throttle until test is done.
If applicable, set octane switch to premium.
The Scan Tool prompt the user to:
Work steering wheel
Pump brake pedal & cycle overdrive (OD) cancel switch.
(Cycle overdrive only if a pushbutton is available.)
Observe screen for the prompt to perform the next action.
Quickly press and release the throttle. One time only!
4. When test completed.
•Turn ignition key off.
• Press
If no problems exist, Code 11 or
111 will be displayed.
5. View and write down
DTCs.
•Use
key to scroll to next DTC.
ENG indicates that DTC is from the
engine or powertrain control
module.
6. Return to Diagnostic Codes Menu.
• Press
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 – 11
to continue.
ENTER
UP or DOWN arrow
.
BACK
Test Completed
Turn ignition
key off.
Press ENTER to cont.
111
Systen Pass Code.
No faults detected
during KOER test.
KOER
326
PFE/DPFE EGR sensor
below min. voltage.
KOER
6
1 of 1
ENG
1 of 3
ENG