Chrysler Diagnostics
Device Controls Menu
IMPORTANT
Device Controls Menu
Switch Test
Actuator Test
Idle Speed Test
– Review Data
– Print Data
– Tool Setup
Switch Test
The Switch Test is used to test the operation of switches on var-
ious Chrysler vehicle systems. These systems may include cruise
control, A/C, braking, and the shift lever position.
Because of differences in vehicle designs, the Switch Test may
not test the same switches in every car.
NOTE: Switch Test is only available on 1989-1995 Chrysler vehicles.
From the Device Controls Menu:
1.Select Switch Test.
•Use
key until Switch Test is
highlighted.
•Press
2. Select switch to test.
•Use the
arrow key.
•Press
Switches for the engine and
transmission are combined into
one list when applicable.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7 – 11
All items marked with "-" are covered in section 3 or 4.
These items are not covered in this section.
UP or
DOWN arrow
ENTER.
UP or
DOWN
ENTER.
Device Controls Menu
Switch Test
Actuator Test
Idle Spe ed Test
Review Data
Print Data
Tool Setup
Select Sw to Test
A/C CLUTCH REL
A/C SWITCH SEN
A/C REQUEST
AIR SW SOL
ASD RELAY
BRAKE SWITCH
CHECK ENG LT
7